It has options for completely assembled uppers/lowers but I didn't want to do that yet
Bender's Big AR-15 & Semi Auto Shilling Thread
534,766 Views |
2919 Replies |
Last: 4 yr ago by robstrom
They are adult legos... most of the fun is assembly and looking for launched detents.
Working build list for my SBR, about to get my trust and stamp started then pick up parts as I can until the stamp comes back
Aero Precision lower-8.35 oz
Aero Precision upper, no FA-6.5 oz
Still looking around for BCG but the Aim lightweight at $119.95 has my attention-8.9oz
Battlelink minimalist stock-5.8 oz
Buffer tube, spring, buffer-9.8 oz
Magpul K2 grip-2.9 oz
LPK no grip or FCG-1 oz
Still figuring out trigger
Guntec USA 10" Air Lite MLOK-7.5 oz w/barrel nut
Strike Industries extended charging handle-1.15 oz
Faxon 10.3 pencil barrel-15 oz
Adjustable gas block and carbine tube-2.5 oz
Vortex Flash hider-2.9oz
Total weight 4 lbs 8oz
Aero Precision lower-8.35 oz
Aero Precision upper, no FA-6.5 oz
Still looking around for BCG but the Aim lightweight at $119.95 has my attention-8.9oz
Battlelink minimalist stock-5.8 oz
Buffer tube, spring, buffer-9.8 oz
Magpul K2 grip-2.9 oz
LPK no grip or FCG-1 oz
Still figuring out trigger
Guntec USA 10" Air Lite MLOK-7.5 oz w/barrel nut
Strike Industries extended charging handle-1.15 oz
Faxon 10.3 pencil barrel-15 oz
Adjustable gas block and carbine tube-2.5 oz
Vortex Flash hider-2.9oz
Total weight 4 lbs 8oz
Also don't know how I left out this
But Law folder is also planned.
But Law folder is also planned.
Amazeballs
(And for another thread, polymer80 build completed today)
(And for another thread, polymer80 build completed today)
If you haven't bought BCG or buffer parts yet, take a look at Dead Foot Arms. They make a folder you can fire with the stock folded.
maverick2076 said:
If you haven't bought BCG or buffer parts yet, take a look at Dead Foot Arms. They make a folder you can fire with the stock folded.
I just bought the Dead Foot MCS, I love it.
No material on this site is intended to be a substitute for professional medical advice, diagnosis or treatment. See full Medical Disclaimer.
$500?!Mantis Toboggan MD said:maverick2076 said:
If you haven't bought BCG or buffer parts yet, take a look at Dead Foot Arms. They make a folder you can fire with the stock folded.
I just bought the Dead Foot MCS, I love it.
The Wonderer said:$500?!Mantis Toboggan MD said:maverick2076 said:
If you haven't bought BCG or buffer parts yet, take a look at Dead Foot Arms. They make a folder you can fire with the stock folded.
I just bought the Dead Foot MCS, I love it.
He's a doctor... duh.
yeah....I thought 200 was steep this college kid ain't throwing 500 at a folder
It's the folder, BCG, buffer, sling and tube, IIRC. Not really that much more than all those parts with the law adapter, and has the capability to fire when folded.
hmmmmm well that changes things
bkag9824 said:The Wonderer said:$500?!Mantis Toboggan MD said:maverick2076 said:
If you haven't bought BCG or buffer parts yet, take a look at Dead Foot Arms. They make a folder you can fire with the stock folded.
I just bought the Dead Foot MCS, I love it.
He's a doctor... duh.
Yep, on my first build too haha. I probably shouldn't have shelled out 500 and almost doubled the cost of my build, but I caught the full blown gun fever and said what the hell. I also just matched into residency so it was somewhat of a treat to myself.
No material on this site is intended to be a substitute for professional medical advice, diagnosis or treatment. See full Medical Disclaimer.
maverick2076 said:
It's the folder, BCG, buffer, sling and tube, IIRC. Not really that much more than all those parts with the law adapter, and has the capability to fire when folded.
Yea, that is correct, also I think if you already have a BCG then you can send it in for them to machine for free if you buy the system. That'll save you $100 bucks.
No material on this site is intended to be a substitute for professional medical advice, diagnosis or treatment. See full Medical Disclaimer.
Hi.Mantis Toboggan MD said:bkag9824 said:The Wonderer said:$500?!Mantis Toboggan MD said:maverick2076 said:
If you haven't bought BCG or buffer parts yet, take a look at Dead Foot Arms. They make a folder you can fire with the stock folded.
I just bought the Dead Foot MCS, I love it.
He's a doctor... duh.
Yep, on my first build too haha. I probably shouldn't have shelled out 500 and almost doubled the cost of my build, but I caught the full blown gun fever and said what the hell. I also just matched into residency so it was somewhat of a treat to myself.
So the Dead foot is 500
The law is 200, MFT stock kit is 75, the aim BCG I have listed right now is 119.
So using the Law is 400ish instead of 500
Think I'll stick with the law, I've seen it on sale some which drops it a bit more and I like how it doesn't have any extra sticking out to the side when its not folded like the DFA does. But time will tell which one ends up on the gun
The law is 200, MFT stock kit is 75, the aim BCG I have listed right now is 119.
So using the Law is 400ish instead of 500
Think I'll stick with the law, I've seen it on sale some which drops it a bit more and I like how it doesn't have any extra sticking out to the side when its not folded like the DFA does. But time will tell which one ends up on the gun
TheEyeGuy said:Hi.Mantis Toboggan MD said:bkag9824 said:The Wonderer said:$500?!Mantis Toboggan MD said:maverick2076 said:
If you haven't bought BCG or buffer parts yet, take a look at Dead Foot Arms. They make a folder you can fire with the stock folded.
I just bought the Dead Foot MCS, I love it.
He's a doctor... duh.
Yep, on my first build too haha. I probably shouldn't have shelled out 500 and almost doubled the cost of my build, but I caught the full blown gun fever and said what the hell. I also just matched into residency so it was somewhat of a treat to myself.
No material on this site is intended to be a substitute for professional medical advice, diagnosis or treatment. See full Medical Disclaimer.
Well.. what things tempt you? You know... so I don't post about them...Mantis Toboggan MD said:TheEyeGuy said:Hi.Mantis Toboggan MD said:bkag9824 said:The Wonderer said:$500?!Mantis Toboggan MD said:maverick2076 said:
If you haven't bought BCG or buffer parts yet, take a look at Dead Foot Arms. They make a folder you can fire with the stock folded.
I just bought the Dead Foot MCS, I love it.
He's a doctor... duh.
Yep, on my first build too haha. I probably shouldn't have shelled out 500 and almost doubled the cost of my build, but I caught the full blown gun fever and said what the hell. I also just matched into residency so it was somewhat of a treat to myself.
Mantis Toboggan MD said:
I also just matched into residency so it was somewhat of a treat to myself.
Congrats! Where ya headed?
SBR parts list looks good.
Didn't realize you were running that BCG until I went back through the thread to see which you had picked.
I assume you like it so far?
I assume you like it so far?
BenderRodriguez said:Mantis Toboggan MD said:
I also just matched into residency so it was somewhat of a treat to myself.
Congrats! Where ya headed?
Heading to Baltimore, good for me, not so much for my gun hobby.
@eyeguy Coincidentally, I'd hate if you posted about optics, since I may or may not be in the market for a decent budget scope (maybe at most ~200-300?) for my build, but unfortunately that will have to wait until I start pulling in a pay check... so I'll check back with you in July haha.
No material on this site is intended to be a substitute for professional medical advice, diagnosis or treatment. See full Medical Disclaimer.
I have a feeling... the deals are going to start flowing. I may be wrong but... I'm snagging some insanely good deals on stuff that I haven't seen since I opened. The industry is down. We're rocking and rolling (thanks OB for that!)
TheEyeGuy said:
I have a feeling... the deals are going to start flowing. I may be wrong but... I'm snagging some insanely good deals on stuff that I haven't seen since I opened. The industry is down. We're rocking and rolling (thanks OB for that!)
Well, I may have to move my time table up then. I'll be on the lookout for those deals.
No material on this site is intended to be a substitute for professional medical advice, diagnosis or treatment. See full Medical Disclaimer.
More of a "I have a feeling these will keep popping up throughout the summer"Mantis Toboggan MD said:TheEyeGuy said:
I have a feeling... the deals are going to start flowing. I may be wrong but... I'm snagging some insanely good deals on stuff that I haven't seen since I opened. The industry is down. We're rocking and rolling (thanks OB for that!)
Well, I may have to move my time table up then. I'll be on the lookout for those deals.
Curious how many of you guys check headspace on new builds. I didn't on my first. But wondering if I should before shooting my second build. If you are using quality parts for your barrel and bcg (Aero and Ballistic Advantage), is there much to worry about?
My understanding it more your BCG and Barrel. I have see some charts where barrel manufacturers will list what BCGs work with their barrels and visa versa. I do because I enjoy that peace of mind but if I remember right most on this board don't.
Check the what?
If you're using a reputable barrel manufacturer, it's not an issue. In fact, I can think of one gun that we have built that had headspace issues and it wasn't really even a true headspace issue it was just something that would have been discovered with a headspace gauge but it was a grendel that already had a matching bolt with it. Oddly enough, it was an Odin Works barrel.TamuKid said:
Curious how many of you guys check headspace on new builds. I didn't on my first. But wondering if I should before shooting my second build. If you are using quality parts for your barrel and bcg (Aero and Ballistic Advantage), is there much to worry about?
In fact, in retrospect, I don't think we even assembled that gun. I think that was a kit gun....TheEyeGuy said:If you're using a reputable barrel manufacturer, it's not an issue. In fact, I can think of one gun that we have built that had headspace issues and it wasn't really even a true headspace issue it was just something that would have been discovered with a headspace gauge but it was a grendel that already had a matching bolt with it. Oddly enough, it was an Odin Works barrel.TamuKid said:
Curious how many of you guys check headspace on new builds. I didn't on my first. But wondering if I should before shooting my second build. If you are using quality parts for your barrel and bcg (Aero and Ballistic Advantage), is there much to worry about?
I think that was me
Tried to break 10 lbs loaded.
PA 5x prism, light, sling, sopmod stock, loaded D60....
9 lbs, 15 oz.
PA 5x prism, light, sling, sopmod stock, loaded D60....
9 lbs, 15 oz.
TamuKid said:
Curious how many of you guys check headspace on new builds.
Here's an Anderson LPK for $29.99
http://www.primaryarms.com/anderson-manufacturing-lower-receiver-parts-kit-223-5-56-am-556-lw-parts-kit?quantity=3
http://www.primaryarms.com/anderson-manufacturing-lower-receiver-parts-kit-223-5-56-am-556-lw-parts-kit?quantity=3
Big brother/little brother picture.
Love my new lightweight but I'm still a sucker for the 20". They're just smooth shooters.
Needs a SSA-E though, and I might put an identical ambi safety/charging handle on the 20" gun.
Love my new lightweight but I'm still a sucker for the 20". They're just smooth shooters.
Needs a SSA-E though, and I might put an identical ambi safety/charging handle on the 20" gun.
Featured Stories
See All
22:40
1h ago
865
9:38
6h ago
1.4k
Around CFB: Predicting the top 12 teams in initial CFP rankings
by Olin Buchanan
CoppellAg2009
Sark says Texas hosting "arguably the best looking team in SEC"
in Billy Liucci's TexAgs Premium
52