Outdoors
Sponsored by

Bender's Big AR-15 & Semi Auto Shilling Thread

545,883 Views | 2919 Replies | Last: 4 yr ago by robstrom
jpb1999
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Mr. Dubi • 8:38a, 11/25/19
AG
So are your saying don't do it because of ammo cost? Just trying to understand your post, I'm not being snarky.

As long as options are readily available, cost is not much of a factor for me, as it will not be shot THAT much as primarily a deer rifle... that is what the .223 is for.
Reply Quote
Duncan Idaho
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to BenderRodriguez • 8:43a, 11/25/19
BenderRodriguez said:
On a phone, hopefully someone else will chime in on the Grendel conversion that's on a keyboard.

The reason your friend is having accuracy issues with a bear creek barrel is that bear creek is garbage. Don't buy his problem barrel.

Hell, even I know that.
Reply Quote
jpb1999
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to BenderRodriguez • 8:45a, 11/25/19
AG
Great, info. Thanks!

He said he has bought other Bear Creek uppers with no problems and recommended them...?

So should I stick with PSA for budget upper, but still accurate enough for deer hunting?

What about 224 vs 6.5 G

Barrel length for deer/varmit/hog hunting?
Reply Quote
Mr. Dubi
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to jpb1999 • 9:36p, 11/25/19
You are correct. I had looked into those calibers when I considered getting into long range competition. If you can find ammo, then those are adequately hunting rounds, since you won't likely shoot as much as I had considered.
Reply Quote
DatTallArchitect
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to jpb1999 • 10:24p, 11/25/19
AG
jpb1999 said:
Great, info. Thanks!

He said he has bought other Bear Creek uppers with no problems and recommended them...?

So should I stick with PSA for budget upper, but still accurate enough for deer hunting?

What about 224 vs 6.5 G

Barrel length for deer/varmit/hog hunting?
I've not heard of anyone using the .224 for anything more than varmint hunting, but I'm not a ballistics guy either. The 6.5 Grendel is a great hunting round, just don't use Hornady Black ammo for hunting with. Another round to look at is the 6.8 SPC II. I wanted something for my AR pistol that would be better suited for hunting and ended up getting an 11.3" barrel from Wilson Combat. Up to about 400 yards, it is very comparable to the 6.5 ballistics. It's also designed for a shorter barrel. I'm not the best shot by any means, but I can get 1 moa groups at a hundred yards with a 1-4x scope.
Reply Quote
Jethro95
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
10:35a, 11/30/19
AG
I'm trying to finish up the Black Friday parts acquisition spree for my Grendel build and I'm down to bolt carrier group.

Are there any noticeable differences between the ones from Toolcraft, Aero Precision, Odin Works, and Fail Zero?

Also, any pros/cons in going with a nickel colored one?
Reply Quote
2 edits
Puryear Playboy
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
11:25a, 11/30/19
AG
Hornady Black in the Grendel and every other round is fine to hunt with. The ELD-M bullet was designed for precision but has shown itself to be suitable as a hunting round. It's killed lots of pigs and four deer for me so far in 6.5G alone.

It will hold together and give good size exit wounds. Something that bullets like the A-Max haven't done for me.
Reply Quote
BenderRodriguez
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
6:40p, 12/2/19
AG
Well, I wasn't planning on another AR build.

Then I saw this picture and I need it in my life.

Reply Quote
14
AgLA06
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to BenderRodriguez • 7:47p, 12/2/19
AG
BenderRodriguez said:
Well, I wasn't planning on another AR build.

Then I saw this picture and I need it in my life.



The Han Solo Special.
Reply Quote
1
1 edit
West Texan
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to BenderRodriguez • 8:07p, 12/2/19
AG
BenderRodriguez said:
Well, I wasn't planning on another AR build.

Then I saw this picture and I need it in my life.



Reply Quote
5
reddog90
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Jethro95 • 8:59a, 12/4/19
AG
Jethro95 said:
I'm trying to finish up the Black Friday parts acquisition spree for my Grendel build and I'm down to bolt carrier group.

Are there any noticeable differences between the ones from Toolcraft, Aero Precision, Odin Works, and Fail Zero?

Also, any pros/cons in going with a nickel colored one?
I need answers to this too. Add Faxon to the BCG mix I guess. I am gathering parts for a grendel build as well.
Reply Quote
Jethro95
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to reddog90 • 9:23a, 12/4/19
AG
I ended up ordering one from Ballistic Advantage as it was on sale for $105 (normally $150) over the weekend which should match up nicely with my Ballistic Advantage barrel. We'll see how it works out. Still waiting for it to ship though. Also ordered a Geissele reaction rod directly from Geissele which has not shipped yet. No worries though, I've got everything I need to get started on the lower.
Reply Quote
reddog90
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
4:43p, 12/5/19
AG
-Any of yall have experience with a JP captured spring kit?

-Is it worth paying Faxon to check the headspace on a bolt/BCG? I ordered a barrel from them, and was going to order a BCG from them as well.

-Anyone have experience with the Superlative Arms AGB? I have an SLR Sentry 7 AGB on my SBR and honestly haven't been that impressed with it. That gun runs dirty AF suppressed and I can't feel the clicks in the GB adjustment screw.
Reply Quote
1872walker
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to reddog90 • 5:36p, 12/5/19
I have a JP on my suppressed 300 BO. It's an incremental improvement. If you're happy with the rest of the gun and have money to spend, go for it. But if you have other needs it's really a matter of priority. I'd definitely buy it again.

Please report on the gas block if you go for it. I have the SLR on another rifle and it does the job but wouldn't mind something better.
Reply Quote
1
1 edit
BenderRodriguez
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
3:50p, 12/12/19
AG
Since this is "and other semi auto" thread....

Keep trying to find a gun as good as the AR. This one might, just might be. We will see.

Reply Quote
4
Furlock Bones
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to BenderRodriguez • 9:04p, 12/12/19
AG
Been looking at those myself.

556 or 300blk?
Reply Quote
2 edits
BenderRodriguez
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Furlock Bones • 9:20p, 12/12/19
AG
For now, it's a 11.5" 5.56 pistol with a brace.

But it'll soon be SBRd and I'll be picking up a 6.75" 300 blk barrel and a Rugged Radiant suppressor to go with it.
Reply Quote
1
HUEY04
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to reddog90 • 10:45p, 12/12/19
AG
I put a Superlative Arms gas block on my AR-10 build at the beginning of the year and love it, very flexible depending on what you want to do. I've since put them on my 3-gun AR-15 and on a dedicated suppressed AR-15 with equally great results. On the 3-gun setup I was able to fine tune the gas and recoil impulse in conjunction with my brake until it stays on target no matter how fast I pull the trigger. On the dedicated suppressed rifle that was previously WAY over-gassed I have the gas almost turned off and can actually shoot a 60 round course of fire while simultaneously breathing and keeping my eyes open, which is a big plus.
Reply Quote
1
reddog90
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to HUEY04 • 8:46a, 12/17/19
AG
Thanks for the feedback. Do you have a long allen key that you slide under the rail to make adjustments? And do you ever re-adjust the AGB? When I got my Sentry AGB, I thought I would just take note of what setting I needed for suppressed and unsuppressed and change back and forth. But it's ended up being a set and forget type thing and the rifle just runs overgassed while suppressed.
Reply Quote
cledus6150
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to BenderRodriguez • 9:13a, 12/17/19
AG
Since I got my MPX and have been nothing but impressed this has been on my list of firearms that I want to pick up. Please update with a review of how you like it!
Reply Quote
Jethro95
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
5:39p, 12/25/19
AG
I finished my Grendel build (except for optics) and went out and function tested it and adjusted the gas block on Monday. Santa brought me a nice Rudolph scope (thanks EyeGuy!) and I mounted it and bore sighted it today. Can't wait to get out to the range in the morning and get it sighted in and see how it does.

FYI - I saw that Ballistic Advantage is having a nice end of the decade sale on their website.
Reply Quote
2
Jethro95
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
11:56a, 1/1/20
AG
Grendel build is complete. Thanks to Eyeguy for hooking me up with the lower and the scope and dr_boogs for making me aware of the Seekins flat bottom rail.



Reply Quote
5
1 edit
reddog90
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Jethro95 • 6:03p, 1/1/20
AG
I'm building a grendel right now too. Log convinced me.

Reply Quote
2
BenderRodriguez
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to reddog90 • 6:07p, 1/1/20
AG
That's three of us. I'll be posting some parts/details later
Reply Quote
1
HUEY04
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
10:56p, 1/1/20
AG
I just ordered an Aero Precision M4E1 builder set and all the bits and pieces from Aero and Brownells. Hopefully I can get it all together over the next week and get some pics up.
Reply Quote
2
BenderRodriguez
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to cledus6150 • 4:50p, 1/2/20
AG
cledus6150 said:
Since I got my MPX and have been nothing but impressed this has been on my list of firearms that I want to pick up. Please update with a review of how you like it!

So I haven't even shot the thing yet.

But I will say that if it shoots as well as it is designed, I think I'm going to love it.



Charging handle, safeties, and even magazine release are all fully ambi from the factory. QD sling points front and rear on both sides. It's nice. And probably just because I came over to ARs from AKs, but I really, really like the ability to fold the stock.



I'm really excited about the caliber/barrel change stuff too.

Front take down pin is all that is required to remove the freefloat handguard, then two torx bits to take off the barrel/pistol. Should be able to change from 16" or 11.5" 5.56 to 6.75" or 9" 300 blk in about two minutes. Same with the rear stock/brace. One torx bit, slide it off, put on whatever different option you wanted.



If it shoots as well as I hope it will, it will be getting SBRd, a 6.75" 300 blk kit and a suppressor. I'm really pleased that I picked it up, especially since I was able to trade for it by ditching a gun I never shot anyway.

Oh, and speaking of SBRs....both of these guns will be getting SBRd. The 320 is going to get milled for a RMR and thrown into a B&T chassis.



So I may shoot some PCC matches with something like this sometime this summer:


Reply Quote
3
cledus6150
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to BenderRodriguez • 5:25p, 1/2/20
AG
Nice I will be watching for more future updates/range reviews. If I get one it will be a 11.5 223 that will promptly be turned into a SBR. Of course all gun plans are on back burner until after my Axis hunt in July!
Reply Quote
BenderRodriguez
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to cledus6150 • 6:01p, 1/2/20
AG
Yep this one is the 11.5 5.56 and I really like the size.

My one quibble is I wish they had made it fully adjustable gas instead of two settings. But given the market I understand why they didn't.

Either way I hope the MCX line sticks around for a whole, it's a really interesting gun.
Reply Quote
1
maverick2076
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
6:02p, 1/2/20
How much is that B&T chassis? Do they make it for other guns?

I just ordered a Kel Tec CP33. I'll be throwing a collapsible brace and a red dot on it.
Reply Quote
BenderRodriguez
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to maverick2076 • 6:05p, 1/2/20
AG
It was originally built on a CZ clone, but those versions are stupid expensive.

They make them for 320s and Glocks, but the Glock one is extra long and kind of defeats the point a bit, IMO.

ETA: price is 200-300 depending on type for just the chassis
Reply Quote
1 edit
cledus6150
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to BenderRodriguez • 6:17p, 1/2/20
AG
I agree 100% I really do hope the MCX and MPX line sticks around for a long time!
Reply Quote
reddog90
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
4:35p, 1/4/20
AG
Should I go H2 buffer on my Grendel build? I'll shoot mainly suppressed. I want to get in on this Geissele sale.

https://geissele.com/premium-mil-spec-buffer-tube-with-super-42-h2.html#color=16
Reply Quote
SMM48
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to reddog90 • 8:11p, 1/4/20
AG
I would do the jp rifle captured spring setup. Much smoother. Less sproing

For 6.5 gren you are looking for the JPSCS2-15H2

https://www.jprifles.com/1.4.7.2_os.php
Reply Quote
1
3 edits
DatTallArchitect
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to reddog90 • 10:27p, 1/4/20
AG
H2 is the way to go with the 6.5 Grendel. As Steve mentioned, the JP silent Capture Spring is a very nice way to go.
Reply Quote
1
FratboyLegend
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to BenderRodriguez • 12:15a, 1/5/20
BenderRodriguez said:
Well, I wasn't planning on another AR build.

Then I saw this picture and I need it in my life.

I must have this. A few questions for anyone that can help.

1) What is that most likely chambered in, .22LR? 9mm? clearly without a buffer tube is is not 5.56.

2) anybody know of a source for the furniture?
#CertifiedSIP
Reply Quote
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.