That's why most shoot subsonic and suppressed.
300 blackout was made for that.
300 blackout was made for that.
Bender's Big AR-15 & Semi Auto Shilling Thread
539,144 Views |
2919 Replies |
Last: 4 yr ago by robstrom
I guess my problem with that is at those speeds the difference in energy between 300blk and a 9mm isn't enough to justify the expense of the round, a new gun, and negatives of bulk of the AR platform compared to a handgun.
It's a 220 grain, 30 caliber bullet with a 30 round magazine and a convenient platform for a red dot and light.
9mm hand gun isn't a good comparison.
9mm hand gun isn't a good comparison.
AgLA06 said:
It's a 220 grain, 30 caliber bullet with a 30 round magazine and a convenient platform for a red dot and light.
9mm hand gun isn't a good comparison.
Oh yeah, and it can be stabilized with a buttstock against your shoulder, cheekweld, and a forward grip.
a rifle is much easier to shoot than a pistol.
I was just talking about muzzle energy in comparison. Taking the round subsonic moves the enery into the 400s about 30% than a 9mm round but less than half of a 5.56. If I'm going to use a bulker more difficult to manage platform I don't want to sacrifice the major benefit of moving to a rifle
If over penetration is what you are worried about then might as well go with a .45 instead of the 9mm. There are videos and reports of a 9mm going through refrigerators. Might as well go slower and fatter than even 9mm.BCO07 said:
I was just talking about muzzle energy in comparison. Taking the round subsonic moves the enery into the 400s about 30% than a 9mm round but less than half of a 5.56. If I'm going to use a bulker more difficult to manage platform I don't want to sacrifice the major benefit of moving to a rifle
It's just part of it. The others are muzzle energy (see above) and round availability. That's why I like 5.56 good mix of all major considerations
Anywho, didn't mean to derail or offend anyone by criticizing a rifle round. Got the info I was hoping for. Seems like 10.5 in 5.56 makes the most sense for me.
07, unsuppressed Anything inside the house is going to be mind numbing for you and anyone with you.
10.5" barrels just add to the fun. Shorter than 16" you will really want to get the CAN on there ASAP.
In a home defense situation you won't have ear pro and you won't be getting in a Bruce Willis gunfight either. Well designed subsonic ammo solves a lot of problems and let you hear afterwards too. Suppressed or unsuppressed.
10.5" barrels just add to the fun. Shorter than 16" you will really want to get the CAN on there ASAP.
In a home defense situation you won't have ear pro and you won't be getting in a Bruce Willis gunfight either. Well designed subsonic ammo solves a lot of problems and let you hear afterwards too. Suppressed or unsuppressed.
maverick2076 said:
Don't go below 10.5" if you are going to suppress 5.56. Most suppressors will not take the pressure.
I'd highly recommend you build a .300 BLK with an 8"-9" barrel instead. It will suppress better and perform better at close ranges than 5.56.
If you really want short, do what I did and build an AR-9 or an AR-45 with a 4.5" barrel and suppress that.
Are you saying anything less than 10.5 won't suppress or including 10.5? Because all of Mk18 clones are 10.3 and many of those are suppressed
Most suppressors are will not be warrantied if attached to a <10.5" barrel. There are some that are rated all the way down to 7".cpsencik04 said:maverick2076 said:
Don't go below 10.5" if you are going to suppress 5.56. Most suppressors will not take the pressure.
I'd highly recommend you build a .300 BLK with an 8"-9" barrel instead. It will suppress better and perform better at close ranges than 5.56.
If you really want short, do what I did and build an AR-9 or an AR-45 with a 4.5" barrel and suppress that.
Are you saying anything less than 10.5 won't suppress or including 10.5? Because all of Mk18 clones are 10.3 and many of those are suppressed
There is A LOT of unburned powder (mass) and pressure (being very close to the chamber) impacting the blast baffle of a suppressor on a 7-8" pistol barrel. It's very hard on them and makes warranty tricky.
Plus you get a lot more exiting the can and it's not near as effiecient as you would like in terms of suppression.
Plus you get a lot more exiting the can and it's not near as effiecient as you would like in terms of suppression.
This was on a MK18 when it blew out... Bullets frequently don't stabilize in barrels <10.5". Baffle strikes are somewhat frequent because of this.cpsencik04 said:maverick2076 said:
Don't go below 10.5" if you are going to suppress 5.56. Most suppressors will not take the pressure.
I'd highly recommend you build a .300 BLK with an 8"-9" barrel instead. It will suppress better and perform better at close ranges than 5.56.
If you really want short, do what I did and build an AR-9 or an AR-45 with a 4.5" barrel and suppress that.
Are you saying anything less than 10.5 won't suppress or including 10.5? Because all of Mk18 clones are 10.3 and many of those are suppressed
45-70Ag
Joined:
Dec 12, 2011
Posts:
34,421
How long do you want to ignore this user?
A Daniel Defense MK18? or MK18 pattern?
A DD MK18. The RISII is the only good part of the factory upper. The barrels are all over gassed. I've been too lazy to install an adjustable gas block or insert into the gas port. Also, this gun when suppressed won't set off tannerite - velocities are just too low.gibberish said:
A Daniel Defense MK18? or MK18 pattern?
PSA running a special on SPARCs for $139 with promo code SPARC...
They are also running a build kit with a bunch of speer gold for for 599.99
GEISSELE SUPER SEMI-AUTOMATIC ENHANCED (SSA-E) TRIGGER & TEN (10) MAGPUL PMAG 30, 5.56X45 MAGAZINES for $240.
http://palmettostatearmory.com/geissele-super-semi-automatic-enhanced-ssa-e-trigger-ten-10-magpul-pmag-30-5-56x45-magazines.html
http://palmettostatearmory.com/geissele-super-semi-automatic-enhanced-ssa-e-trigger-ten-10-magpul-pmag-30-5-56x45-magazines.html
I saw that but I am gun broke at the moment.
BreNayPop said:
PSA running a special on SPARCs for $139 with promo code SPARC...
Do y'all have a positive opinion of the SPARC?
Seems to be good. Looking for something similar on home defense AR
I like mine for the money... for 139 i couldnt pass it up.
I have also had good experiences with cheaper bushnell and burris red dots as well... but those seem more hit or miss.
I have also had good experiences with cheaper bushnell and burris red dots as well... but those seem more hit or miss.
Run one on my 10.5" AR pistol. Really like it. Quality optic for the price - especially that price.ttha_aggie_09 said:BreNayPop said:
PSA running a special on SPARCs for $139 with promo code SPARC...
Do y'all have a positive opinion of the SPARC?
Seems to be good. Looking for something similar on home defense AR
Well crap. That's not the response I needed. PSA and the eyeguy are going to bankrupt me.
ttha_aggie_09 said:
Well crap. That's not the response I needed. PSA and the eyeguy are going to bankrupt me.
The vendors may change as the need changes, but hopefully we go bankrupt now to avoid buying in the more expensive times.
At least, thats the lie i tell my wife.
I'm constantly having to convince my wife "new gun? I've always had this one... its just been in the safe for a long time"
Learn that trick young... unfortunately its sad how many purses and shoes shes just had in her closet the whole time that i have never seen.
Plausible deniability
Plausible deniability
What all is needed to go from fsb and 2 piece hand guard to ff rail?
Psa has 5.56 nickel boron bcg for $100
New FSBaggie4231 said:
What all is needed to go from fsb and 2 piece hand guard to ff rail?
New rail which will come with a new barrel nut and shims
You'll also need some roll pin punches to remove the old FSB
Where do y'all recommend getting engraved dust covers? Looking for a "Come and Take It" one but my google search just brings me to sketchy looking websites.
TIA
TIA
I used Tactical Gear Junkie to have one custom made. I am very happy with it.
I bought mine from Thunderbolt Gunworks.
ETA: While they don't show the "Come and Take It" on their website, I know they have them. Dad and I both bought dust covers from them recently at a gun show.
http://www.thunderboltgunworks.com/pb/wp_10eb2636/wp_10eb2636.html
ETA: While they don't show the "Come and Take It" on their website, I know they have them. Dad and I both bought dust covers from them recently at a gun show.
http://www.thunderboltgunworks.com/pb/wp_10eb2636/wp_10eb2636.html
Thanks guys!
new to the AR world. First build is complete, shoots great at the range and now I'm excited to take it into the field this is a hunting rig, for running after hogs mostly, possibly yotes.
But I need suggestion for a sling. Not sure whether to go with a one point style or a more conventional hunting carry strap. What does the OB suggest?
But I need suggestion for a sling. Not sure whether to go with a one point style or a more conventional hunting carry strap. What does the OB suggest?
Featured Stories
See All
Aggies, Longhorns renew storied series with 'everything' to play for
by Olin Buchanan
Stakes are raised in Vegas as Aggies participate in Players Era Festival
by Luke Evangelist
7:51
5h ago
1.1k
12:16
10h ago
2.3k
munch96
"Most expensive regular season football game of all time"
in Billy Liucci's TexAgs Premium
86