That thing looks badass!
What kind of bipod?
What kind of bipod?
Bender's Big AR-15 & Semi Auto Shilling Thread
534,753 Views |
2919 Replies |
Last: 4 yr ago by robstrom
XTS 5"-7" from Academy, just picked up something cheap until I figure out what I like
TamuKid said:BenderRodriguez said:ttha_aggie_09 said:
Sweet!
Newbie question:
What is SPR?
You're about to fall down a really fun rabbit hole.
SPRs, Mk12s, Mk18s, Recce, Mini Recce, Mod-H......
Seriously, the real SPR rabbit hole is a little too deep (money wise) for my pockets. Between parts from KAC, PRI, NightForce, and OPS Inc alone, I'd be at double the cost of my entire build. Haha
If you'd like some gun porn for the rabbit hole give a follow on Instagram, you won't regret it.
https://instagr.am/p/BOKfeMbBIp2
I love when he posts new stuff
Just got a shipping notification: my 14.5" barrel I sent off to get pinned/welded will be back in my hands on Wednesday. Time to get off my butt and build the lower before it gets here.
Anyone have any recs for a complete heavy barrel (HBAR) upper? I'm moving to Maryland soon (I know, terrible), and want to bring my AR with me, so it needs to be HBAR to be state compliant (from what I understand). Rather than change out the barrel on my current upper I'd rather buy a complete HBAR upper. Plus I feel like now is as good a time as any to try out a different caliber, I've looked at 300 AAC so far, my current upper is 5.56.
Complete HBAR uppers seem few and far between, I've checked out PSA but this is the only one I found that I'm interested in (5.56 HBAR upper), but I'd rather not pay $400 since I just shelled out about $1000 for my current build. Right now I'm leaning towards a 300 AAC blem upper from MAS defense, which would only put me back $225. Any recommendations would be appreciated, thanks in advance.
Complete HBAR uppers seem few and far between, I've checked out PSA but this is the only one I found that I'm interested in (5.56 HBAR upper), but I'd rather not pay $400 since I just shelled out about $1000 for my current build. Right now I'm leaning towards a 300 AAC blem upper from MAS defense, which would only put me back $225. Any recommendations would be appreciated, thanks in advance.
No material on this site is intended to be a substitute for professional medical advice, diagnosis or treatment. See full Medical Disclaimer.
Soon.....
Sort of fits here, just got an email from Ruger that the RPR is going to be offered in 5.56/.223 now
CharlieBrown17 said:
Sort of fits here, just got an email from Ruger that the RPR is going to be offered in 5.56/.223 now
What an...odd choice of caliber for the RPR.
Now if they would do a bullpup bolt action in 5.56 ala DSR-1 it might get interesting.
So why does a heavy barrel make it compliant? Is there any reasoning written behind the regs?
Yeah I would've expected a move the other direction into something like 300WM before 5.56
GeeBee said:
Is there any reasoning written behind the regs?
loooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooool
It's a gun control law.
There is no reason whatsoever behind it, just feelings and freedom hating politicians.
BenderRodriguez said:GeeBee said:
Is there any reasoning written behind the regs?
loooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooool
It's a gun control law.
There is no reason whatsoever behind it, just feelings and freedom hating politicians.
What trigger is that?
Mantis Toboggan MD said:
Anyone have any recs for a complete heavy barrel (HBAR) upper? I'm moving to Maryland soon (I know, terrible), and want to bring my AR with me, so it needs to be HBAR to be state compliant (from what I understand). Rather than change out the barrel on my current upper I'd rather buy a complete HBAR upper. Plus I feel like now is as good a time as any to try out a different caliber, I've looked at 300 AAC so far, my current upper is 5.56.
Complete HBAR uppers seem few and far between, I've checked out PSA but this is the only one I found that I'm interested in (5.56 HBAR upper), but I'd rather not pay $400 since I just shelled out about $1000 for my current build. Right now I'm leaning towards a 300 AAC blem upper from MAS defense, which would only put me back $225. Any recommendations would be appreciated, thanks in advance.
I'm not sure if you've reviewed MD's AWB, but it's a bit more complex than you'd think.
http://mdsp.maryland.gov/Organization/Pages/CriminalInvestigationBureau/LicensingDivision/Firearms/FirearmSearch.aspx
TheVarian said:
What trigger is that?
It's a Geissele SSA-E.
That one I picked up at Cola Warrior Texas last year, thus the engraving.
The little Peep is a nice touch
Thought I was finishing this one up today....maybe not.
BenderRodriguez said:
Thought I was finishing this one up today....maybe not.
"Unexpected delay" + firearm shipment = Commies
gumby579 said:
"Unexpected delay" + firearm shipment = Commies
It's in DFW right now, flew in last night before the storms. Weather messed them up a little last night, I guess.
No big deal, I can finish tomorrow or friday instead.
But I was looking forward to having this done by today.
Just under 7 lbs with red dot, light, loaded 20 round mag and a sling.
New HD rifle.
New HD rifle.
What's everybody's thought on the slide fire or bump fire stocks? Thinking of for fun....
Extremely inaccurate. It's a gimmick.
You'd generally be better served with a binary trigger - fires once on the pull and then again on the release. Easier to control and, in my experience, much more accurate and more useful.
You'd generally be better served with a binary trigger - fires once on the pull and then again on the release. Easier to control and, in my experience, much more accurate and more useful.
TheEyeGuy said:
Extremely inaccurate. It's a gimmick.
Standing, sure.
There's an interesting thread on Arf with some guys (including some who were SAW gunners in the Marines) messing around with them. Proned out with bipods they're making decent hits on man sized targets at 200-300 yards without issue.
I think they make a good poor mans SAW, but you have to use it with a bipod for it to be worth much.
The D60s make the whole concept a lot more viable and interesting too.
Not to mention, who doesn't love 1400 RPM?
I am waiting on an Echo from Fostech.......
Everyone seems to love them and they seem to be quality. Better be for the dough
Everyone seems to love them and they seem to be quality. Better be for the dough
I think thats where i got this bug... stupid arfcom.
And justin, ive never had nor seen any experience with the binary trigger... but at a 99 dollar price point for some bump fire systems for psuedo full tilt and making bunches of noise, is the binary trigger really worth that much more?
Any new products coming anybody knows about that look fun?
And justin, ive never had nor seen any experience with the binary trigger... but at a 99 dollar price point for some bump fire systems for psuedo full tilt and making bunches of noise, is the binary trigger really worth that much more?
Any new products coming anybody knows about that look fun?
That looks fun. Says 6 mo wait time currently... how long you been waiting?
A little over 2 months...... just like anything else. Just have to try and forget about it 
I've got the Franklins in store, and they've been popular. If aggie_3 sees this, a little of what's in store for Connor's bachelor party... if I don't have a full auto lower put together by then, I'll be dropping one of the franklins into my SBR. I know they are more expensive but they seem to be pretty cool and everyone that I know of that's gotten one so far has loved it.AGricola08 said:
A little over 2 months...... just like anything else. Just have to try and forget about it
Just started a build with aero precision.
Will hopefully be done around June or so.
Will hopefully be done around June or so.
One never really 'finishes' a build... at best they pause to continue a build on another lower.
BreNayPop said:
One never really 'finishes' a build... at best they pause to continue a build on another lower.
Most accurate post on this thread.
BreNayPop said:
One never really 'finishes' a build... at best they pause to continue a build on another lower.
No material on this site is intended to be a substitute for professional medical advice, diagnosis or treatment. See full Medical Disclaimer.
This is my first build and just looking at everything has been addicting.
I can easily see this being something where you are always buying pieces here and there.
I can easily see this being something where you are always buying pieces here and there.
So what's your plans for your first build?
For the lower, trying to build this exact lower.
https://aeroprecisionusa.com/ar15-complete-lower-receiver-standard-fde.html
The upper, I'm still reading about but I may try to do something similar to the upper on the bottom of the picture
https://aeroprecisionusa.com/m4e1-556-16-mid-complete-upper.html
https://aeroprecisionusa.com/ar15-complete-lower-receiver-standard-fde.html
The upper, I'm still reading about but I may try to do something similar to the upper on the bottom of the picture
https://aeroprecisionusa.com/m4e1-556-16-mid-complete-upper.html
Featured Stories
See All
22:40
1h ago
865
9:38
5h ago
1.4k
Around CFB: Predicting the top 12 teams in initial CFP rankings
by Olin Buchanan
CoppellAg2009
Sark says Texas hosting "arguably the best looking team in SEC"
in Billy Liucci's TexAgs Premium
52