Outdoors
Sponsored by

Bender's Big AR-15 & Semi Auto Shilling Thread

535,062 Views | 2919 Replies | Last: 4 yr ago by robstrom
CactusThomas
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to CharlieBrown17 • 6:45a, 1/6/17
AG
Great looking build. I'm sure it will shoot great.

If I can make a suggestion, move the scope mount up a couple of notches on the rail if you are happy with the eye relief. I would get the mount away from the adjustment knobs.
Reply Quote
1
CharlieBrown17
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
9:27a, 1/6/17
AG
It's a 223 wylde chamber and I'll move that, didn't think about
Reply Quote
87IE
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
11:22a, 1/6/17
AG
I am close to being finished completing a stripped lower and have run into a problem.

I haven't been able to get the roll pin for the trigger guard started. I've tried a couple different punches but it's been a SOB. Are there any tricks? I've seen a youtube video where they used a C-Clamp but have also heard not to do that.

Have any of y'all used one of the screw in guards like this one? I imagine the threads of the screws cut into the aluminum receiver.

Thanks.. I'm waiting for the stock to come in and that's the only thing I'm missing to slap it on my 6.8 upper. I have one more lower to build that I'm going to use as a 5.56 pistol if I can ever get to Houston to talk to Eyeguy about building the upper for me.
Reply Quote
TexasAggies06
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to 87IE • 11:30a, 1/6/17
AG
I have used multiple screw-in trigger guards and love them. One less roll pin is always a positive in my book.
Reply Quote
1
CharlieBrown17
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
11:47a, 1/6/17
AG
I use vice grips on all the pins I can. Wrap the ends in tape if you're worried about scratches. I hate using punches
Reply Quote
1
1 edit
The Wonderer
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to CharlieBrown17 • 11:49a, 1/6/17
AG
CharlieBrown17 said:
I use vice grips on all the pins I can. Wrapped the ends in tape if you're worried about scratches. I hate using punches
Same here. Pliers to install, punches to remove.
Reply Quote
1
87IE
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
12:06p, 1/6/17
AG

Quote:
I have used multiple screw-in trigger guards and love them. One less roll pin is always a positive in my book.
Good to know.. I think I may get one for the pistol lower.


Quote:
I use vice grips on all the pins I can. Wrapped the ends in tape if you're worried about scratches. I hate using punches
I'll try again using vise grips. I've already nicked up a couple spots.

Thanks for the replies.
Reply Quote
CharlieBrown17
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
12:35p, 1/6/17
AG
I won't lie to you, my ARs all have a few little marks from me putting them together.

I don't mind it. I'm working on my own guns and not building safe queens
Reply Quote
1
BenderRodriguez
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
2:14p, 1/6/17
AG
So they already sold out, but PA had Windham factory guns (the people who used to own Bushmaster, IIRC) on closeout for $399 this morning.

May be the lowest I've ever seen a "quality" factory rifle priced for.

Reply Quote
3
CharlieBrown17
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
3:52p, 1/6/17
AG
Local shop took almost all damn day for a state inspection and oil change so shooting this damn rifle still eludes me.

Soon dammit soon.
Reply Quote
dubi
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to CharlieBrown17 • 3:53p, 1/6/17
AG
Quote:
Local shop took almost all damn day for a state inspection and oil change

i would have killed someone.....
Reply Quote
CharlieBrown17
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to dubi • 3:55p, 1/6/17
AG
dubi said:
Quote:
Local shop took almost all damn day for a state inspection and oil change

i would have killed someone.....


Rifle is in the trunk. There's still time



*NSA THIS IS A JOKE YOU SPYING *******S
Reply Quote
4
txyaloo
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to dubi • 4:02p, 1/6/17
AG
dubi said:
Quote:
Local shop took almost all damn day for a state inspection and oil change

i would have killed someone.....
Wonder if he's at Quicker Sticker
Reply Quote
1
dubi
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to txyaloo • 4:09p, 1/6/17
AG
txyaloo said:
dubi said:
Quote:
Local shop took almost all damn day for a state inspection and oil change

i would have killed someone.....
Wonder if he's at Quicker Sticker
Or parked in front of my house!!!!!!!!!!!!!!
Reply Quote
1
txyaloo
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to dubi • 9:07p, 1/6/17
AG
dubi said:
txyaloo said:
dubi said:
Quote:
Local shop took almost all damn day for a state inspection and oil change

i would have killed someone.....
Wonder if he's at Quicker Sticker
Or parked in front of my house!!!!!!!!!!!!!!
Let's hope it doesn't flood!
Reply Quote
Bazooka Joe
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Bazooka Joe • 12:47p, 1/7/17
AG
Bazooka Joe said:
Mines getting close too. Hope to show it in a week or so. I'm out next week hunting, so it may stretch into a couple weeks. Those who have offered advice will see items they recognize.


Okay, I got home from a spectacular hunting trip to South Texas Thursday night. All of the AR parts I had ordered before Christmas were waiting for me when I got home (for the most part). I'm a complete newb to the AR scene so about 99% of my AR knowledge came from this thread.

Binder put me on the optics and Eye Guy found my forward quad rail. Thanks guys. Now I just need to take it out and shoot. Here it is:





The parts list is pretty simple:
Started out as a DPMS Oracle 308 then added/swapped out:
LimbSaver Snap-on Recoil Pad
Magpul 25 Rd Magazine
Brownell 6.5" FF Quad
Grip-Pod LE Polimer Bi-Pod
CCOP MNT-1516 High Profile AR-ArmourTac Rifle
Scope Mount Rings
VLTOR 7.62 Charging Handle
Vortex Strike Eagle 1-6x Scope

Oh, and the anyone wondering how the hunt went...



Hell of a week for me!!




Reply Quote
3
4 edits
TX_COWDOC
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
1:52p, 1/7/17
AG
Nice Nilgai! What'd you shoot it with?

Check yourself for ticks by the way!
Reply Quote
Bazooka Joe
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
4:50p, 1/7/17
AG
Thanks! It was the trip of a lifetime for me. I used a Browning A Bolt with a Leupold VX3 4.5-10x.

Edit to add 30-06.
Reply Quote
1 edit
jackie childs
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
5:24p, 1/8/17
still contemplating my first AR...too many choices.

I've ruled out a complete build, and I'm leaning toward buying a completed rifle. was planning to spend around $1k, but flexible.

I've got a friend who just won a Daniel Defense M4V11 in a raffle. He's got a couple of other AR's and knows I've been looking, so he told me he'd sell it to me for $1,200. I looked them up and they're a bit more at most stores.

Anybody have experience with it and, if so, should I jump on it? Any issues I need to consider?

Reply Quote
Naveronski
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to jackie childs • 5:26p, 1/8/17
AG
jackie childs said:
still contemplating my first AR...too many choices.

I've ruled out a complete build, and I'm leaning toward buying a completed rifle. was planning to spend around $1k, but flexible.

I've got a friend who just won a Daniel Defense M4V11 in a raffle. He's got a couple of other AR's and knows I've been looking, so he told me he'd sell it to me for $1,200. I looked them up and they're a bit more at most stores.

Anybody have experience with it and, if so, should I jump on it? Any issues I need to consider?


Jump on it.

Price is fair, and it's a great rifle.
Reply Quote
8
jackie childs
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Naveronski • 6:15p, 1/8/17
Naveronski said:

Jump on it.

Price is fair, and it's a great rifle.
Awesome, thanks!
Reply Quote
1
CharlieBrown17
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
6:22p, 1/8/17
AG
Agreed by a lot. I enjoy building mine and DD is one of the few rifles I'd consider buying.
Reply Quote
2
Bazooka Joe
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to jackie childs • 7:18p, 1/8/17
AG
jackie childs said:
still contemplating my first AR...too many choices.

I've ruled out a complete build, and I'm leaning toward buying a completed rifle. was planning to spend around $1k, but flexible.

Anybody have experience with it and, if so, should I jump on it? Any issues I need to consider?



You're exactly where I was 6 months ago. Look up a couple of posts for my completed AR10. This was a completed gun that I tinkered with. The same DPMS AR15 Oracle is available for $550 all over the place and is a very affordable completed AR. That's what I did and it worked out as a great entry level AR for me.
Reply Quote
CharlieBrown17
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
7:26p, 1/8/17
AG
Ehhh that'd be fine if you were getting just to tinker but if you've ruled out a build and want to spend around 1K that DD is the best route imo
Reply Quote
4
Bazooka Joe
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to CharlieBrown17 • 8:56p, 1/8/17
AG
Maybe so. I based my post on a $1k budget and maybe starting with a completed gun. If all you want to spend is $1k, you may want to lower your starting price point to allow for optics and other accessories which can add up quick.
Reply Quote
DatTallArchitect
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Bazooka Joe • 9:19p, 1/8/17
AG
Different people view the set budget different ways. I'm working on a build now. My budget was $1500, but I wasn't including optics in that budget (and still will probably end up busting that budget some). For me, I've always heard "spend as much on your optics as you do on your rifle", so I've never thought of the rifle's optics as being part of the budget. If so, I would have to split the price. $500, while not impossible, is a very tight budget for an AR.
Reply Quote
Duncan Idaho
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to DatTallArchitect • 9:38p, 1/8/17
DatTallArchitect said:
Different people view the set budget different ways. I'm working on a build now. My budget was $1500, but I wasn't including optics in that budget (and still will probably end up busting that budget some). For me, I've always heard "spend as much on your optics as you do on your rifle", so I've never thought of the rifle's optics as being part of the budget. If so, I would have to split the price. $500, while not impossible, is a very tight budget for an AR.
that rule of thumb might have worked when all the optics were made by hand in japan, Austria or in the states. but you can get scopes out of china or the Philippines that blow this out of the water
Reply Quote
1
CharlieBrown17
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
10:24p, 1/8/17
AG
Yeah 400 or so for a scope gets you more than a quality piece of glass nowadays.


Will I eventually own a more expensive scope? Probably. Will I need said more expensive scope? Probably not.


ETA I do have an ACOG but it was inherited and not bought by me. It's a dandy piece of equipment though
Reply Quote
2
1 edit
MTxTwelve
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
8:23a, 1/9/17
Visited the child a while back



FDE n' glowsticks

Reply Quote
Astroag
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
4:13p, 1/9/17
AG
can we get a rundown of those ^^^^^
_______________________________________________________


If ya ain't cheatin, you ain't tryin!!!
Reply Quote
AverageJones
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
4:16p, 1/9/17
AG
Should have all the parts in for my first AR build this week. Starting to look at the tools I'll need to put it together, does anyone have a list of what I'll need to pick up/ best places to buy?
Reply Quote
Mr. Dubi
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to MTxTwelve • 5:40p, 1/9/17
MTxTwelve said:
Visited the child a while back




Damn that's a long can!
Reply Quote
5
CTGilley
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to AverageJones • 8:13p, 1/9/17
AG
Punches and a hammer.
Some screw drives/allen/hex depending on the kit.
Pliers with tapped jaws.

If you are installing the barrel and armors wrench is handy and a vise block

I use a torque wrench. some say it is not needed and that is probably true but I have one so why not.

Also if Mil-Spec you will probably want to polish the trigger.

Oh and my most important tool is a card board box to assemble the smaller lower parts. Decent size so it is not hard to work in but catches any detents or springs that do not want to behave. Also a stiff business card or thin piece of plastic a razorblade works well for installing the front take down pin detent.

Reply Quote
1 edit
CharlieBrown17
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
8:44p, 1/9/17
AG
Razorblade works well for the detent as well.
Reply Quote
CTGilley
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to CharlieBrown17 • 9:48p, 1/9/17
AG
CharlieBrown17 said:
Razorblade works well for the detent as well.
I feel stupid now. I dig a business card out of my wallet when I always have a razorblade sitting on my work bench.

Thank you.
Reply Quote
1
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.