Outdoors
Sponsored by

Bender's Big AR-15 & Semi Auto Shilling Thread

537,969 Views | 2919 Replies | Last: 4 yr ago by robstrom
DatTallArchitect
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Naveronski • 9:40p, 11/28/16
AG
That's true. One extra lower would be worth the education, if I did mess up the first one.

It's my understanding that with the 80% lower you are just cutting out the fire control pocket, rear shelf and trigger hole. That you first drill a series of holes to get the bulk of the metal out, then use a mill bit to clean it up. I was thinking that, by attaching a fence to the drill press, I could do this if I take my time and double/triple check my setups before drilling/milling. (Not to mention using a good jig kit) Does that sound right? Am I missing anything?
Reply Quote
CTGilley
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
7:16p, 11/30/16
AG
NVM
Reply Quote
1 edit
BenderRodriguez
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to CTGilley • 10:28p, 11/30/16
AG
CTGilley said:
NVM

I have no idea what was posted before the edit, but...

There are no silly questions. Ask away.
Reply Quote
1
CTGilley
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to BenderRodriguez • 9:58a, 12/1/16
AG
BenderRodriguez said:
CTGilley said:
NVM

I have no idea what was posted before the edit, but...

There are no silly questions. Ask away.
I was asking about a LPK from R GUNS but I found some reviews on the company online and they were not good.

I was/am looking for a nickel/stainless LPK. I don't want to spend the money on titanium I might just try a different direction.
Reply Quote
TheEyeGuy
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to CTGilley • 4:50p, 12/1/16
AG
Curious why you're wanting nickel/stainless?
Reply Quote
2
CTGilley
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to TheEyeGuy • 5:41p, 12/1/16
AG
Purely cosmetic I like the way the stainless barrel looks under a black rail with black break. Trying to carry the same look to the receiver. "AR-15 the Barbie Doll for men."
Reply Quote
TheEyeGuy
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to CTGilley • 5:50p, 12/1/16
AG
So, just wanting a silver trigger then? Or all of the pins etc?
Reply Quote
CTGilley
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to TheEyeGuy • 6:14p, 12/1/16
AG
All the pins, release, disconnect, maybe forward assist.....
Reply Quote
dubi
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to CTGilley • 6:21p, 12/1/16
AG
CTGilley said:
Purely cosmetic I like the way the stainless barrel looks under a black rail with black break. Trying to carry the same look to the receiver. "AR-15 the Barbie Doll for men."


This is pretty funny!

Reply Quote
2
Furlock Bones
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to dubi • 6:43p, 12/1/16
AG
dubi said:
CTGilley said:
Purely cosmetic I like the way the stainless barrel looks under a black rail with black break. Trying to carry the same look to the receiver. "AR-15 the Barbie Doll for men."


This is pretty funny!



It's funny but at the same time I don't know when people started thinking that men don't have taste and can't enjoy things that are aesthetically pleasing. Guns, watches, clothing, etc.
Reply Quote
1
dubi
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Furlock Bones • 7:38p, 12/1/16
AG
Furlock Bones said:
dubi said:
CTGilley said:
Purely cosmetic I like the way the stainless barrel looks under a black rail with black break. Trying to carry the same look to the receiver. "AR-15 the Barbie Doll for men."


This is pretty funny!



It's funny but at the same time I don't know when people started thinking that men don't have taste and can't enjoy things that are aesthetically pleasing. Guns, watches, clothing, etc.

At our house I'm the one that asks for certain colors on my guns. I think Mr Dubi doesn't care. His FDE doesn't even coordinate. :-)

He crayons my logos, bought me pink breast cancer grips for my M&P, and built me a really pretty red Punisher AR.
Reply Quote
TheEyeGuy
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Furlock Bones • 8:30p, 12/1/16
AG
Furlock Bones said:
dubi said:
CTGilley said:
Purely cosmetic I like the way the stainless barrel looks under a black rail with black break. Trying to carry the same look to the receiver. "AR-15 the Barbie Doll for men."


This is pretty funny!



It's funny but at the same time I don't know when people started thinking that men don't have taste and can't enjoy things that are aesthetically pleasing. Women, Guns, watches, clothing, etc.
Duuuuuuude.
Reply Quote
3
Furlock Bones
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to TheEyeGuy • 7:16a, 12/2/16
AG
TheEyeGuy said:
Furlock Bones said:
dubi said:
CTGilley said:
Purely cosmetic I like the way the stainless barrel looks under a black rail with black break. Trying to carry the same look to the receiver. "AR-15 the Barbie Doll for men."


This is pretty funny!



It's funny but at the same time I don't know when people started thinking that men don't have taste and can't enjoy things that are aesthetically pleasing. Women, Guns, watches, clothing, etc.
Duuuuuuude.
left off women because that's the only thing that has always been acceptable.
Reply Quote
1 edit
Puryear Playboy
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
8:23a, 12/2/16
AG
We should retitle this thread the Metrosexuals Guide to AR15s!
Reply Quote
7
HumbleAg04
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
8:30a, 12/2/16
AG
If you like SS barrels you should get a nice matte finish on it instead of the polished shiny one. Looks the bestest. Use a NiB BCG and some other matte silver accents and be a baller!
Reply Quote
CharlieBrown17
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to HumbleAg04 • 8:36a, 12/2/16
AG
HumbleAg04 said:
If you like SS barrels you should get a nice matte finish on it instead of the polished shiny one. Looks the bestest. Use a NiB BCG and some other matte silver accents and be a baller!


Saw a badass WOA barrel on snipershide that had a matte finish then was fluted so the flutes were shiny and the barrel was still matte.
Reply Quote
1 edit
Puryear Playboy
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
9:39a, 12/2/16
AG
In an effort to pull this thread back to respectability from the Millinial rathole it is sliding down...

I give you the latest fun toy from my sponsor Adams Arms. 12.5" .308 piston...umm...pistol.

It's setup with a Sig Brace and I added a Law Tactical side folder. Trigger is an LT MBT. The can on it at the moment is a YHM. Scope is Truglo's 1-6x. These are great scopes for the money, and money aside. True 1x, red and green illumination and it comes with a throw lever and a functional mount. The reticle is not bad, and they are working on a new one per the specs I gave them.

This upper is one of only ten in the wild, but I expect it will become part of the standard product line. Best accuracy is 5 rounds into .85", but I am still playing with loads. The best part is that using the adjustable gas system on the Adams piston I have a recoil impulse that is lighter than my 556 guns.

The thermal goes on it this weekend, and may just stay there most of the time from now on...

[URL=.html][/URL]h

[URL=.html][/URL]

[URL=.html][/URL]
Reply Quote
5
2 edits
Dirty-8-thirty Ag
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Puryear Playboy • 9:55a, 12/2/16
AG
How hard is it to put a side folding stock on to a lower? I am new to the whole black rifle craze and I am in the middle of a .300 blk pistol build, have a Sig Brace kit ordered from OpticsPlanet, what else do I need?
Reply Quote
Puryear Playboy
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
10:06a, 12/2/16
AG
It's easy. The Law Tac product is a 10 minute install. You can't fire the rifle with it folded, but that's not a big deal.

I am going to use one on my 7.5" PDW project.
Reply Quote
1 edit
Dirty-8-thirty Ag
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Puryear Playboy • 10:13a, 12/2/16
AG
I think I am gonna be putting one on my 7.5" .300 blk pistol build.
Reply Quote
ttha_aggie_09
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Puryear Playboy • 10:19a, 12/2/16
AG
Are they still $250? I like them but that's a lot of money just to fold the stock. Curious if any other options out there.
Reply Quote
The Wonderer
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to ttha_aggie_09 • 10:22a, 12/2/16
AG
ttha_aggie_09 said:
Are they still $250? I like them but that's a lot of money just to fold the stock. Curious if any other options out there.
I saw one for $234 over the weekend with sales.

There are other options in the $40-50 range that are substantially similar to the law tac model (they're knockoffs), but I got yelled at when I posted the links because they're chinese. I have three installed and never had an issue.
Reply Quote
1
1 edit
Duncan Idaho
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to The Wonderer • 10:33a, 12/2/16
Are they the "air soft" models?
Reply Quote
The Wonderer
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
10:35a, 12/2/16
AG
Have no idea why it was labeled that. They're all metal and of the same design as the Law Tac from what I can tell.
Reply Quote
1
Duncan Idaho
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
10:53a, 12/2/16
I saw some at a gun show and thst was how they were justifying the price difference. They seemed pretty much identical to me.
Reply Quote
1
TheEyeGuy
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Duncan Idaho • 10:53a, 12/2/16
AG
Duncan Idaho said:
Are they the "air soft" models?
There is a LOT of stuff that is labeled for "air soft" that is brought in that are labeled that way so they aren't gun parts being shipped over. Varying levels of quality on those but some very good stuff is brought over along with some total crap.
Reply Quote
Naveronski
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to The Wonderer • 11:59a, 12/2/16
AG
The Wonderer said:
Have no idea why it was labeled that. They're all metal and of the same design as the Law Tac from what I can tell.

Not all metal is the same.
Not all aluminum is the same.
Reply Quote
1
Bazooka Joe
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
4:42p, 12/2/16
AG
The Truglo 1-6x is the model I decided to go with based on the reviews and price. I havent bought it yet. Let me know it performs.
Reply Quote
MTxTwelve
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
8:29a, 12/7/16
Paid the M110 suppressor a little visit last night

Reply Quote
2
1 edit
pedcom
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
5:37p, 12/7/16
S
My spouse has given me the go-ahead to do a nice AR15 build. I'm stuck on choosing a barrel. My choice would be an 18" barrel with a rifle length gas system chambered for 223 Wylde. It should also be lightweight. Any recommendations?
Reply Quote
gibberish
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to pedcom • 5:40p, 12/7/16
AG
pedcom said:
My spouse has given me the go-ahead to do a nice AR15 build. I'm stuck on choosing a barrel. My choice would be an 18" barrel with a rifle length gas system chambered for 223 Wylde. It should also be lightweight. Any recommendations?
Seekins Precision has some nice .223 Wylde uppers, and will start selling barrels alone as well.

There are several others to consider as well.
Reply Quote
El Chupacabra
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to pedcom • 9:45p, 12/7/16
pedcom said:
My spouse has given me the go-ahead to do a nice AR15 build. I'm stuck on choosing a barrel. My choice would be an 18" barrel with a rifle length gas system chambered for 223 Wylde. It should also be lightweight. Any recommendations?


Have you looked at LaRue barrels?
Reply Quote
CharlieBrown17
User Profile Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
9:47p, 12/7/16
AG
White Oak is a place to look as well, either barrels or an upper
Reply Quote
1
Furlock Bones
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
10:00p, 12/7/16
AG
well, i've owned my AR for 2 plus years and haven't done anything to it. i have been reading a lot more and decided i want to know more about the platform and fix some things.

first things first, the milspec trigger had to go. in its place, a Geissele SSA-E. holy smokes what a difference.

second, a new grip was in order. Ergo Deluxe. i was worried when the package came in that it would be too large. but, at the moment in the house, it actually feels very nice.

i know this is nothing to you guys. but, for me it is something new and fun to learn.

Reply Quote
5
dr_boogs
User Profile
Private Message
Ignore User Stop Ignoring
How long do you want to ignore this user?
24 hours One week Permanently Cancel
In reply to Furlock Bones • 11:17p, 12/7/16
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.