I put a Geisselle SSA in my last build. Really Nice! My next one will probably be a SSA-E though. It's a tad lighter
If you are lucky enough to catch Geissele at a trade show they have their entire product line mounted in blocks along with MilSpec triggers so you can feel exactly the differences between them for the set and break.Quote:
Short of having a buddy with one of these triggers in their rifle, how can you test out one of these higher end triggers without plunking down the cash and ordering one?
geissele Super Dynamic 3 Gun (SD-3G) Trigger is SICK.CharlieBrown17 said:
Anybody have suggestions on triggers for a SBR build?
Right now I have a Rock River NM two stage and a G2S-E, thinking I'd rather a good single stage on the SBR.
You might take a look at the BCM grip. I picked one up for my last build and actually prefer it over the MIADs I have on my other builds. It has storage in the grip.CharlieBrown17 said:
I remember looking into it before, I already run MIADs on everything so that was the thought there but I'll look into the K grip.
Does it have the storage like the MIAD? was planning on keep legal docs there.
the GRF is supposed to be the cheaper version of this. Except not flat. It uses a different way to retain the hammer and isn't laser engraved. Based on my personal experience with the G2S-E vs the SSA-E think I'm going to stick with the GRFQuote:
geissele Super Dynamic 3 Gun (SD-3G) Trigger is SICK.
I'll look into that tomorrowQuote:
You might take a look at the BCM grip. I picked one up for my last build and actually prefer it over the MIADs I have on my other builds. It has storage in the grip.
http://www.missionfirsttactical.com/Products/Pistol-Grips/ENGAGE-AR15-M16-Pistol-Grip-with-interchangeable-strapsCharlieBrown17 said:
Just looked at the MFT engage, I'm not really a fan of grips with molded in finger slots typically. I have wide hands and big palms and they just don't tend to fit me right.
ETA just saw that they make ones without the finger slots
CharlieBrown17 said:
Are you using the K or the K2?
Naveronski said:
How does its angle compare to the Bravo Company gunfighter grip? IIRC, both have a similar angle vs a traditional grip.
Sounds like we need to have an OB scary black gun range dayBenderRodriguez said:Naveronski said:
How does its angle compare to the Bravo Company gunfighter grip? IIRC, both have a similar angle vs a traditional grip.
I don't know, don't have the gunfighter grip on anything.
Really like the k grip on my 10.5" gun.
Thinking about throwing one on a 16" gun to see how I like it there.
CharlieBrown17 said:
Think I have my SBR build planned just time to wait on sales and see what I can grab used
BA 10.3 Hanson Barrel
Aero enhanced upper
Aero lower
Aero 9" Quantum M-Lok rail
Geisselle GRF trigger
Magpul MAID
Mission First Minimalist stock
BCM Gunfighter CH
Magpul MBUS
still need to pick a BCG but also don't really have a problem throwing a mil spec one in either. anything not listed will just be a mil spec part more likely than not. Will probably pick up a PA micro dot unless I get a steal on something else used.
aggie4231 said:
How do you like the tavor?
Anodization will change from company to company and even metal to metal. You're good.Van Buren Boy said:
It's Forged. It's fits well on an Anderson lower but the color is kinda off. Still trying to find anyone who has Aero lowers in stock
Thanks!
And even batch to batch.TheEyeGuy said:Anodization will change from company to company and even metal to metal. You're good.Van Buren Boy said:
It's Forged. It's fits well on an Anderson lower but the color is kinda off. Still trying to find anyone who has Aero lowers in stock
Thanks!