Outdoors
Sponsored by

THE AR THREAD

162,253 Views | 1314 Replies | Last: 7 yr ago by CharlieBrown17
NRH ag 10
How long do you want to ignore this user?
AG
quote:
3?


I laughed.

There's a nice mature black lab and a young but feisty pit bull/corgi mix in that picture. Not seen is the pit/corgi's girlfriend, a yellow lab mix.
Dirt 05
How long do you want to ignore this user?
AG
I've got a question for the AR gurus about national match iron sights on the AR 15. I bought one of the CMMG bargain bin rifles about a year ago and put a detachable carry handle on the rifle (it's a 16" barrel in case that piece of info matters). I was wondering if I would see an improvement in accuracy from changing out the standard front sight post to a national match post? From what I've checked online it seems this "could" be a fairly cheap and easy way to improve accuracy. Would the rear peep sight need to be changed to a NM as well to get the greatest benefit? I've found that my elevation on the target stays fairly consistent but that I drift horizontally - I'm guessing this is coming from an inconsistent point of aim on the front sight which at 50 yds is wider than the bulls eye on a target.
lexofer
How long do you want to ignore this user?
AG
Yes, putting on a narrower front sight will make it easier to be more precise with your shots.
Log
How long do you want to ignore this user?
AG
Your best bet for better accuracy is to put a better trigger in it. The bargain bins aren't match rifles, so I doubt you will see much of an accuracy increase with a thinner front sight. If anything, the thinner front post will be harder to see.
Dirt 05
How long do you want to ignore this user?
AG
Those are good things to consider, thanks for the input.
firethewagonup
How long do you want to ignore this user?
bump this up
AggieMarine
How long do you want to ignore this user?
AG
Dirt, its something you’ll have to experiment with. On an A2 I’d say a thinner post definitely helps. On a M4 length AR it's going to depend more on your vision. If you have young eyes it'll be easier to focus in on the close post. I’m 37 and I have no problems focusing on a thin (.046) post on an A2, but on a M4 post it’s pretty tough. Also, a smaller rear aperture may help you focus on the post and make the target clearer.
Post removed:
by user
Streetfighter 02
How long do you want to ignore this user?
AG
Looks great!
NRH ag 10
How long do you want to ignore this user?
AG
Got a Magpul AFG in today, should be the last major change until this one get's SBRed later this year.

MWTrowbridge
How long do you want to ignore this user?
SWEET! Will be ordering a couple goodies for mine in 3 weeks...


~Michael

FS/FT Kel Tec P-32 like new in the box as purchased.

Tried to add a pic of mine but it would not let me so here is a link:


http://www.flickr.com/photos/47256745@N06/4364004105/sizes/o/




[This message has been edited by MWTrowbridge (edited 2/17/2010 12:34a).]
NRH ag 10
How long do you want to ignore this user?
AG
Here you go:

PTXaggie08
How long do you want to ignore this user?
AG
NRH, why is that better than a foregrip on the front rail?
NRH ag 10
How long do you want to ignore this user?
AG
The AFG works better than a VFG for a certain shooting style that has been used by 3 gunners and instructors for years, and has recently been taken more mainstream by the Magpul Dynamics guys. The thought behind it is you can control the muzzle better under recoil and when transitioning between multiple targets if your hand is as far out as possible. You can use a VFG for this kind of grip, but in my case only my pinky and ring finger were on the VFG, my social and trigger finger were on the bottom rail and my thumb was alongside the top rail, pretty similar to how I grip a pistol with my offhand. It worked, but was uncomfortable, not consistently repeatable, and left most of the VFG unused. Th AFG lets the wrist sit at a more natural angle and makes it easier to get the same hand position everytime. In the next few weeks I'm going to try to get a hold of a shot timer and a place where I can run some drills to see if it increases speed on multiple targets.
MWTrowbridge
How long do you want to ignore this user?
Thanks NRH!

~bump
tx4guns
How long do you want to ignore this user?
AG
It's Christmas in February! Tax return finally got here, so I have the following on its way. Can't WAIT to get my .223 SPR finished and begin work on the Grendel! I figured I'd stimulate the small business economy buying gun parts.

THIS:


and THIS:


and THIS:


2 of THESE:


a set of THESE:


and a set of THESE to put on the SPR with an M8 Leupold until I can save up for the Larue/Trijicon combo:
Post removed:
by user
tx4guns
How long do you want to ignore this user?
AG
I would but I will use these rings on the Grendel with a Zeiss eventually.
Signel
How long do you want to ignore this user?
AG
Isn't magpul redoing their backup sites? I had heard they were making them more robust or something.
NRH ag 10
How long do you want to ignore this user?
AG
quote:
Isn't magpul redoing their backup sites? I had heard they were making them more robust or something.


I know they're making the rear sight lower so optics in a LT-104 will clear.
tx4guns
How long do you want to ignore this user?
AG
I'll upgrade the rear sight when they do.
BreNayPop
How long do you want to ignore this user?
AG
So with my formerly bought stripped lower, I got a Del-Ton kit for the rest of the gun that I'll show off when it finally gets put together...

But then for some odd reason I decided to get an 18 inch cmmg bargain bin gun.

And since I was in the shop to have then send the bargain bin gun, I then got another stripped lower to actually build one on my own part by part. I think I have entry BRD... hope it doesn't get worse.

Damn you all. And thanks.

[This message has been edited by BreNayPop (edited 2/27/2010 2:21p).]
BreNayPop
How long do you want to ignore this user?
AG
Oh, and since there's not a good thread on optics just yet...

What optics OUTSIDE of EOTech do you guys use for your AR?
NRH ag 10
How long do you want to ignore this user?
AG
Aimpoint is the only RDS I will use.

My next AR will have a low power variable, most likely a trijicon TR24G or NF NXS.
Mr07Ag
How long do you want to ignore this user?
AG
ttt

I need to reference some stuff off of here tonight.
BreNayPop
How long do you want to ignore this user?
AG
Took me 3 hours to reread this entire thread from page 1!
35chililights
How long do you want to ignore this user?
AG
quote:
hope it doesn't get worse.



lol. thats comedy right there!!
Log
How long do you want to ignore this user?
AG
quote:
I think I have entry BRD... hope it doesn't get worse.


Ha! Before you know it, your collection will probably be rivaling mine.
aggielostinETX
How long do you want to ignore this user?
AG
I realized last night I have 5 receivers: 2 complete rifles, 1 complete lower, 1 CAV arms lower and 1 striped lower.

BRD is a sickness with no cure.

I need build a .204 tack driver next.


BreNayPop
How long do you want to ignore this user?
AG
TTT...

Just wondering what was new in the Texags AR world.
tmanAg08
How long do you want to ignore this user?
AG
quote:
I know they're making the rear sight lower so optics in a LT-104 will clear.


Well crap. I guess the new ones aren't out yet, then? I just bought one, and was hoping to put a Leupold Mark AR in a LT-104 on there too. What are my options?
tx4guns
How long do you want to ignore this user?
AG
Wait or go with the higher SPR mount that Larue offers.

I'm sure you guys read my thread already about "Sandy". Didn't fire b/c the hammer spring was in backwards. I felt like a dumbass, but at least it was simple to fix. I might to a test here at the house with a primed case just to see if it fixed it before I drive 30 minutes to the range.
aggielostinETX
How long do you want to ignore this user?
AG
tx4guns,
My brother and I did that on the last build.
We didn't put one of the trigger springs in right.
Deats99
How long do you want to ignore this user?
AG
You're the "expert"!

"When the government fears the people, you have liberty; when the people fear the government, you have tyranny."
Thomas Jefferson
Streetfighter 02
How long do you want to ignore this user?
AG
I managed to swap the trigger and bolt release springs on one build. I had poor results with that if you can imagine. I even made a small rant about the lpk on here. These things happen.
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.