While we're at it, might as well reintroduce the other critter that disappeared from west Texas in December of 1970.
Western States Draw Deadlines: 2017
177,854 Views |
1605 Replies |
Last: 6 yr ago by AgEng06
What about the critter that disappeared in 1900?
Interesting stuff ursus. Way more layers to that than I would have ever thought. Why is the amount of private land in Texas considered an obstacle to elk management specifically? Plenty of other species are managed by the state.
No material on this site is intended to be a substitute for professional medical advice, diagnosis or treatment. See full Medical Disclaimer.
Because there are already a buttload of ear tagged livestock elk that elk ranchers want to be able to buy/sell/kill with no respect to tags or seasons.
I never get particularly excited about grizzlies in Texas. That one specimen got Texas it own subspecies. It was legitimately a huge bear, but that is literally the only known grizzly in that part if Texas. For a long time that was the ONLY known evidence. A skull was found along the Red River, but there is debate over the source.
Stuff with charismatic species are rarely simple.
Elk also cover a huge area.
Elk also cover a huge area.
I'm assuming your 1970 reference was wolves? The timing seems about right I think.
Yes, figured I would throw some gas on the fire.
Sean98 said:
Did you change their mind?? or are these different boots??
Danner Gila in Optifade
Thems the 6" ones. I like the 8s. Also like straight leather more than the camo. I got a couple pair ordered and will worry about finding a new boot down the road.
Bien. I just saw that boot in my email and thought perhaps you had change the course of the entire company.
Oh you would have heard it here first were that the case.
I got invited to hunt a big ranch in the low country around rifle opening week of archery. I can't not go, but I'm a little bummed I can't do a wilderness trip the same week. Don't know much about the property other than its fairly large. I've hunted about 20 miles west of it a few times (and spent a summer on a ranch on top in high school), but I don't think I'll be able to check this place out before season opens.
Yah, you have to go. If you don't you might not get an invite next year and it could be an opportunity of a lifetime.
You'll never find my name on a list that turns down invites like that
I can tell gohunt is marketing with shayne and '06 in mind... (read the caption)
Ya...that gets my attention.
UPS man just delivered my Seek Outside Silvertip. Checklist is shrinking. So is my bank acct.
A box of FL arrive today. Had a 40% off coupon code so I hit em hard for a pile of stuff I don't need.
On a related note I heard defender outdoors in ft worth has priced their remaining fl inventory at cost.
Go forth!
On a related note I heard defender outdoors in ft worth has priced their remaining fl inventory at cost.
Go forth!
Started tuning the bow after getting new strings last month... From a few paper tune shots, something is definitely outta whack... And down the rabbit hole we go!
I was in more or less the same position. I couldn't shoot my Hoyt for s**t coming into turkey season this year. ...to the point I was going to sell it and get a new bow. Earlier this week I dusted it off, started shooting it again and realized something was janky with my peep. I needed a new rest anyway, so Itook it in to my pro shop and started from scratch. The cams were definitely out of whack.
After installing my new rest (I went with a Hamskea Hybrid Hunter) I got it paper tuned, and then after sighting in my 25 yard pin I did a walk back tune today.
I'm feeling much better about things now, and I saved myself $1000 on a new bow (for now).
After installing my new rest (I went with a Hamskea Hybrid Hunter) I got it paper tuned, and then after sighting in my 25 yard pin I did a walk back tune today.
I'm feeling much better about things now, and I saved myself $1000 on a new bow (for now).
Missed the elk. That's about right.
Ouch.
Just like real elk. I could see them real small in the distance but they made no sounds.
I need to find a dusky grouse target.
Just like real elk. I could see them real small in the distance but they made no sounds.
I need to find a dusky grouse target.
**** the bed bigtime on day 2 of golf tournament today after leading our flight day 1.
I'm having the last of my elk tenderloin for breakfast tmw to right the ship.
I'm having the last of my elk tenderloin for breakfast tmw to right the ship.
ursusguy
Joined:
Jan 25, 2006
Posts:
26,319
How long do you want to ignore this user?
Nice! Holding off on the new bow for a bit longer?
Below are the tears at 5yds, and one shot up close to verify. I moved the rest a little, but it didn't help a ton as those are pretty extreme. Measured ATA (fairly close) and then started looking at my cams and they're definitely funky so I'll have to add/subtract some twists...Needs more research on my end
So I guess now I can either: 1. Go to the shop and use their press . OR 2. Buy a press to do on my own. OR 3. Build my own "press" with some paracord and ratchet straps (my buddy has done this, but it's sketchy)...Probably spend some time at the shop to get it sorted out next week
Below are the tears at 5yds, and one shot up close to verify. I moved the rest a little, but it didn't help a ton as those are pretty extreme. Measured ATA (fairly close) and then started looking at my cams and they're definitely funky so I'll have to add/subtract some twists...Needs more research on my end
So I guess now I can either: 1. Go to the shop and use their press . OR 2. Buy a press to do on my own. OR 3. Build my own "press" with some paracord and ratchet straps (my buddy has done this, but it's sketchy)...Probably spend some time at the shop to get it sorted out next week
Yeah, I'm definitely going to hold off another year. I just wasn't finding anything I loved. Lots that I liked, but none that I loved. Also, I'm almost a 32" draw length, so that really limits my choices.
As for pressing your bow, unless you're just really a tinker-er, or you have some sort of neighborhood "shared" press, I just don't see the need to spend a lot of money on a quality press. Go to the shop and in 15 minutes he can do what it'll take you hours to do for minimal money (if any, my guy does those kinds of tweaks for free given the money I've spent with him over the last few years).
As for pressing your bow, unless you're just really a tinker-er, or you have some sort of neighborhood "shared" press, I just don't see the need to spend a lot of money on a quality press. Go to the shop and in 15 minutes he can do what it'll take you hours to do for minimal money (if any, my guy does those kinds of tweaks for free given the money I've spent with him over the last few years).
Is there a hole cut in that box covered with paper or are you shooting through the cardboard as well...?
No material on this site is intended to be a substitute for professional medical advice, diagnosis or treatment. See full Medical Disclaimer.
There's a hole on the far side of the box so not shooting thru the cardboard. Just paper and then into the target..
Yeah I'll just go to the shop tomorrow. I'm definitely a tinker-er and having the stuff to do it on my own sounds appealing, but I'm sure the shop can get me fixed up a lot quicker (and cheaper)... Plus I've got a back log of other projects calling my name
Yeah I'll just go to the shop tomorrow. I'm definitely a tinker-er and having the stuff to do it on my own sounds appealing, but I'm sure the shop can get me fixed up a lot quicker (and cheaper)... Plus I've got a back log of other projects calling my name
Finally went thru most of the pics on my Unit 33 NM cam. It's Pretty much a big bag of fail. Not much to look at, but I know they're out there. I seent em.
Tough call when you have to go that far to set/check a camera. You never know if one stupid blade of grass is going to trigger a thousand false pictures, it if you're going to get big Daddy over and over.
I'm not one to give up on something just bc it doesn't work once or twice. I set 2 additional cameras. Prob won't go back till it cools off.
Thanks for sharing...hopefully better luck next time with the pics
These 2 trips have been very valuable. I'm confident I've found a good area that won't likely get much pressure. I've seen deer, identified and marked travel corridors and gotten a really good overall feel of the area... which is "large".
Also, yall need to take a better look at pics 3 and 4, and tell me what you see.
Also, yall need to take a better look at pics 3 and 4, and tell me what you see.
Lungblood said:
These 2 trips have been very valuable. I'm confident I've found a good area that won't likely get much pressure. I've seen deer, identified and marked travel corridors and gotten a really good overall feel of the area... which is "large".
Also, yall need to take a better look at pics 3 and 4, and tell me what you see.
Actual scouting work!
How far out was that lone cow?
Featured Stories
See All
A&M at risk of undercut when undertaking trip to underrated Auburn
by Olin Buchanan
48:02
6h ago
2.4k
5:59
3h ago
882
16:53
7h ago
2.4k
Legalize-It-Ags
Interesting parallel on RBs going into sip game
in Billy Liucci's TexAgs Premium
149