Home Improvement
Sponsored by

Over my head in Sauerkraut Bend.

132,016 Views | 685 Replies | Last: 17 hrs ago by p_bubel
p_bubel
How long do you want to ignore this user?
[url=https://flic.kr/p/YumYPD][/url]2017-10-16_11-07-18 by Paul Bubel, on Flickr

Getting the bathroom windows ready for new frosted glass (picked up this afternoon)

Cleaned up the door and pulled the hardware for cleaning.

Sweet:

[url=https://flic.kr/p/YumW4Z][/url]2017-10-16_11-06-26 by Paul Bubel, on Flickr

I now know what a rim lock is. And damn, my thumb looks fat.
Mine are iron and not brass, but they'll clean up really nice. Which is what I'm working on now. They are on every door in the place. Should be a long process to clean them all up and repaint them.
dubi
How long do you want to ignore this user?
The Fife
How long do you want to ignore this user?
The quickest way to clean up rim locks is to empty them out, take the cast iron frame and put it in boiling water. The paint that's built up over the years will come right off without a fight, then give it a couple coats of gray primer and then hit it with black lacquer paint. The finish will look original and it lasts a long time. Altogether it's less than an hour per set, quicker if you do more than one at a time.

If you need matching ones that style has been reproduced and is for sale all over the place (google C20 rim lock). It looks like a 3" backset like the one sold here for example. Restorers 3 inch Backset Rim Lock There are also originals for sale all over and new/reproduction porcelain enameled knobs and replacement keeps are also easy to come by.

I'd offer up some of mine but that's a style I don't think I ran across - most of mine are plain. I'll check the box before I fly out to Austin in a couple of weeks.
p_bubel
How long do you want to ignore this user?
...and the house was broken into.

They even took my cheap folding chairs.
dubi
How long do you want to ignore this user?
AG
That sucks!!!!!

Get some game cams. Go visit the Outdoors board.
p_bubel
How long do you want to ignore this user?
So every tool accumulated over the past 2 years is now gone. Plus the stuff I borrowed recently. The place doesn't have insurance to cover contents yet due to its condition.

This was a kick to the junk and going to set me back a bit.

The pendejos where in the place for quite a while. The neighbors noticed nothing (there are a lot of cars parked on the street and a lot of construction going on around me) The camera on the house across the street is blocked by a tree between it and my house.

I found a pair of jeans, they used my toilet without bothering to flush it, left coke cans and cigarette butts in the house. They left my beer in the mini-fridge though. So, that's a win. Most importantly, they didn't trash the place. And for that I should be happy.

Overall, fun day!

There's a bigger issue here though and it's pretty obvious I can't leave my tools hidden in the house closets while I'm gone any longer. A locked shed isn't going to prove anymore secure either.

Lugging the small things like circular saws and drills and jigsaws back and forth isn't a huge deal but it the miter saw that is going to be a PITA. I don't know what to do with that other than move into the house permanently with no working shower.

I do need to get some cheap window coverings up though, pronto. They'll be back at some point I'm sure.
AgLA06
How long do you want to ignore this user?
AG
p_bubel said:

So every tool accumulated over the past 2 years is now gone. Plus the stuff I borrowed recently. The place doesn't have insurance to cover contents yet due to its condition.

This was a kick to the junk and going to set me back a bit.

The pendejos where in the place for quite a while. The neighbors noticed nothing (there are a lot of cars parked on the street and a lot of construction going on around me) The camera on the house across the street is blocked by a tree between it and my house.

I found a pair of jeans, they used my toilet without bothering to flush it, left coke cans and cigarette butts in the house. They left my beer in the mini-fridge though. So, that's a win. Most importantly, they didn't trash the place. And for that I should be happy.

Overall, fun day!

There's a bigger issue here though and it's pretty obvious I can't leave my tools hidden in the house closets while I'm gone any longer. A locked shed isn't going to prove anymore secure either.

Lugging the small things like circular saws and drills and jigsaws back and forth isn't a huge deal but it the miter saw that is going to be a PITA. I don't know what to do with that other than move into the house permanently with no working shower.

I do need to get some cheap window coverings up though, pronto. They'll be back at some point I'm sure.
I doubt window coverings are going to deter anyone. Especially if they've already jacked you and know you hide your stuff anyway. You're probably better off getting power to the place and installing a camera system inside and out and hooking up an alarm.

or

focus on the water / shower issue and move in ASAP. However, unless you're retired or working from home, this only helps at night.
p_bubel
How long do you want to ignore this user?
And by taking everything, I'm not just talking about the bigger power tools I'm talking hammers, crowbars, levels (pretty useless in a house of this age) ****ing box of nails, boxes of screws, squares, tin snips, screwdrivers... everthing. I just outfitted a new independent contractor.




LOL
p_bubel
How long do you want to ignore this user?
AgLA06 said:


I doubt window coverings are going to deter anyone. Especially if they've already jacked you and know you hide your stuff anyway. You're probably better off getting power to the place and installing a camera system inside and out and hooking up an alarm.

or

focus on the water / shower issue and move in ASAP. However, unless you're retired or working from home, this only helps at night.
I'm currently thinking both, asap. That's the only way forward at this point. I'm just hoping they don't come back for the new romex that's already been installed in the house. ( I doubt that)
Dr. Doctor
How long do you want to ignore this user?
AG
Get a locking job box?

Realize it might not stop but better than a closet. Don't know if you can lock them down to the floor with bolts inside though.

~egon
The Fife
How long do you want to ignore this user?
Sucks to read stuff like this, I'd assumed that the KWD has turned around enough so that this didn't really happen anymore. Been there/done that with lugging the miter saw and wet saw around before and it's not fun.

Does your current place have a garage? What I ended up doing was leaving my tools in the truck (which is not my daily driver) and hopping in that to go work on the house after work. It was already loaded up and ready to go so it wasn't that bad.
p_bubel
How long do you want to ignore this user?
It'll always be a possibility unless I move way out into the boonies, and even then... There are at least 4 houses on my block getting some significant work done, so a lot of new eyeballs looking for easy scores. And it was easy for them.

I'm not overly paranoid by nature, and this really hasn't changed that honestly, but I need to make it a little more difficult. This break in doesn't bother me as much as the previous one in 78209, where they took a lot of personal stuff. It's just tools, even if it's going to take me a while to replace them.

I always swore that I would never want/need a camera system but it looks like I'm getting one in the next week or two.

I can leave some of the smaller tools in the Jeep, but with the way things are going with her right now it'll get stolen/broken into at some point too. :P It's been one of those weird years. There's no garage at either place right now that I can lock it up in.

Quote:

Get a locking job box?
It would probably fall through my floor.
UnderoosAg
How long do you want to ignore this user?
AG
F thieves. F 'em all the way to hell. Friend of mine's neighbor is an HVAC guy who just lost all his tools. Broke into his work van in front of his house.

If you need to borrow a few things in the meantime to keep going, let me know. agee96 at yahoo.
p_bubel
How long do you want to ignore this user?
I appreciate that immensely, I really do.

I should be good to go here in a bit though, and if things get stolen again I rather it not be someone else's stuff. (Again)

I've got some cheap work to get done over the next couple of weekends.
Aggietaco
How long do you want to ignore this user?
AG
We have to deal with this on construction sites fairly often. The Knaack tool boxes chained to something immobile or bolted to a slab works pretty well as a deterrent. Hell, chain it to a tree outside and make them cut down the tree to take it. In the mean time, get some of the fake video cameras with a battery powered red LED as a little piece of mind. They're like $5/EA.
p_bubel
How long do you want to ignore this user?
Has anyone had a door chemically dipped/stripped?

The palm sander (taking too long) and off the self strippers (a mess) have got me looking in the direction for the doors. I've read a couple of conflicting reports on long term issues with having it dipped.
Aggietaco
How long do you want to ignore this user?
AG
No experience sending anything off to be stripped, I've had good luck with a RO sander on large flats and citri strip on everything else.
p_bubel
How long do you want to ignore this user?
I gave the citristrip a try today actually, and this door is still kicking my ass.

Thanks though.

The RO is fine for the flat stuff as you say, but it's these damn corners that are kicking my butt (this is a window but the same detail as the door panels):

[url=https://flic.kr/p/21c6b4d][/url]
2017-11-07_02-15-23 by Paul Bubel, on Flickr
p_bubel
How long do you want to ignore this user?
Well, since this is bumped might as well update.

I can get the windows done with a heat gun alright, it just takes a while. Strangely satisfying.

[url=https://flic.kr/p/21c6fyW][/url]
2017-11-07_02-15-58 by Paul Bubel, on Flickr

Said door ( I just want to get the bathroom working finally)

[url=https://flic.kr/p/D9aMQd][/url]
2017-11-07_02-14-57 by Paul Bubel, on Flickr

[url=https://flic.kr/p/D9aLJf][/url]
2017-11-07_02-14-44 by Paul Bubel, on Flickr
p_bubel
How long do you want to ignore this user?
Hardware cleaned up...

[url=https://flic.kr/p/21c6dW7][/url]
2017-11-07_02-15-47 by Paul Bubel, on Flickr

[url=https://flic.kr/p/21c6hjj][/url]
2017-11-07_02-16-16 by Paul Bubel, on Flickr

The window latches will probably stay unpainted.
Maximus_Meridius
How long do you want to ignore this user?
AG
Maybe something like this in a pneumatic angle grinder? I've used similar for stripping paint off of aluminum when I didn't want the wire wheel to scratch it all to hell.
p_bubel
How long do you want to ignore this user?
I might order that. The wire wheels where too rough as you said.


{Ordered}
The Fife
How long do you want to ignore this user?
I personally would be very reluctant to sand that old paint due to lead. On larger projects like that I've normally used a heat gun set to 600 and a quality set of scrapers.

Citristrip isn't very good IMO, especially with older, layered stuff. If you want to go that route I'd recommend something much less environmentally friendly.
GarlandAg2012
How long do you want to ignore this user?
AG
Bump. Any updates?
p_bubel
How long do you want to ignore this user?
Sorry man, I didn't realize this had been bumped last month.

Got some significant progress to post, so give me a bit to put 'em up.
p_bubel
How long do you want to ignore this user?
So, there was some work on the original rim locks. What a nasty mess.

[url=https://flic.kr/p/274udWs][/url]2018-05-13_05-49-07
by Paul Bubel, on Flickr

Holloween was pretty spectacular. I've never seen crowds like that. 45 pounds of candy out the door before 10 pm even with the rain.

[url=https://flic.kr/p/HttRMD][/url]2018-05-13_05-49-54
by Paul Bubel, on Flickr
p_bubel
How long do you want to ignore this user?
[url=https://flic.kr/p/HttXFc][/url]2018-05-13_05-51-15
by Paul Bubel, on Flickr

Got my first snow in the place. Still no working heat other than the antique gas heater which just doesn't cut it.


[url=https://flic.kr/p/278r19z][/url]2018-05-13_05-51-26
by Paul Bubel, on Flickr

Still working on the damn door at this point (And still need to work on it further)

My buddy getting the fart fan up and running

[url=https://flic.kr/p/278r2Ea][/url]2018-05-13_05-51-42
by Paul Bubel, on Flickr

Stripped the interior "shiplap" from the bathroom walls. Every little bit of room helps with the shower.

[url=https://flic.kr/p/25KTTDk][/url]
2018-05-13_05-52-26 by Paul Bubel, on Flickr
p_bubel
How long do you want to ignore this user?
12 foot 2x4s do "fit" in the Jeep. This became a common trip for the couple of weeks.

[url=https://flic.kr/p/274uzHs][/url]2018-05-13_05-53-15
by Paul Bubel, on Flickr

[url=https://flic.kr/p/JZyyPJ][/url]2018-05-13_05-53-25
by Paul Bubel, on Flickr

I really need a truck

[url=https://flic.kr/p/HtuhnF][/url]2018-05-13_05-55-18
by Paul Bubel, on Flickr


[url=https://flic.kr/p/25KU6oT][/url]2018-05-13_05-55-06
by Paul Bubel, on Flickr

[url=https://flic.kr/p/25KU3kD][/url]2018-05-13_05-54-37
by Paul Bubel, on Flickr
p_bubel
How long do you want to ignore this user?
[url=https://flic.kr/p/25KU8vt][/url]2018-05-13_05-55-27
by Paul Bubel, on Flickr

[url=https://flic.kr/p/274uLGw][/url]2018-05-13_05-55-42
by Paul Bubel, on Flickr

[url=https://flic.kr/p/278rrXi][/url]2018-05-13_05-56-01
by Paul Bubel, on Flickr

[url=https://flic.kr/p/274uPJo][/url]2018-05-13_05-56-18
by Paul Bubel, on Flickr
p_bubel
How long do you want to ignore this user?
Found some matching reclaimed wood for hallway. It was pricey as hell but the place I found it at is top notch. If anyone in town needs a recommendation for old flooring, let me know.

[url=https://flic.kr/p/274uRnJ][/url]2018-05-13_05-56-38
by Paul Bubel, on Flickr

[url=https://flic.kr/p/262V3S1][/url]2018-05-13_06-01-30
by Paul Bubel, on Flickr
p_bubel
How long do you want to ignore this user?
Tile time...

[url=https://flic.kr/p/24nLDm1][/url]2018-05-13_05-59-17
by Paul Bubel, on Flickr

[url=https://flic.kr/p/24nLPgb][/url]2018-05-13_05-59-44
by Paul Bubel, on Flickr
Pendragon12
How long do you want to ignore this user?
AG
Love the tile. Where did you get it from? I'll be doing some bathroom remodeling pretty soon and trying to figure out where to start buying all this stuff.
p_bubel
How long do you want to ignore this user?
So at this point the torque converter on my old Jeep started giving me trouble so I did what any normal person does mid-reno and bought a newer one. (One I'm afraid to use to move lumber in)

[url=https://flic.kr/p/262V3Rj][/url]2018-05-13_06-01-10
by Paul Bubel, on Flickr


Actually functional door hardware. What a novel concept.

[url=https://flic.kr/p/278rvBc][/url]2018-05-13_05-56-46
by Paul Bubel, on Flickr

Door is hung and still not finished. Had a party for King William Fair that was not entirely planned but was a great day. (Neighbor had a good live band, it was fun)


[url=https://flic.kr/p/HtuUUP][/url]2018-05-13_06-03-00
by Paul Bubel, on Flickr

[url=https://flic.kr/p/278scDX][/url]2018-05-13_06-03-31
by Paul Bubel, on Flickr

[url=https://flic.kr/p/24nMcu9][/url]2018-05-13_06-03-39
by Paul Bubel, on Flickr
p_bubel
How long do you want to ignore this user?
Pendragon12 said:

Love the tile. Where did you get it from? I'll be doing some bathroom remodeling pretty soon and trying to figure out where to start buying all this stuff.
Floor tile I ordered online, it was a hell of a lot cheaper that way. The subway tile I got local from the Alamo Heights Home Depot. (They have a surprising amount of choices there)
p_bubel
How long do you want to ignore this user?
Jacked up my back while prepping the wainscoting for paint. Getting old sucks! So, that's not done yet. And the water heater won't light again. Blech. The bathroom is about 90% complete though and didn't explode with all the use during King William.

So, pulled the drywall in the hallway and I kinda like the look.

[url=https://flic.kr/p/HtuV2T][/url]2018-05-13_06-03-08
by Paul Bubel, on Flickr

[url=https://flic.kr/p/24nMc49][/url]2018-05-13_06-03-16
by Paul Bubel, on Flickr

It looks like they just used old crates to line the walls.

I got a quote for central heat and air with insulation for the attic. Waiting on that, I have a drywall guy waiting to start the common areas.

[url=https://flic.kr/p/JZz8HQ][/url]2018-05-13_06-00-22
by Paul Bubel, on Flickr
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.