Outdoors
Sponsored by

Rattle Can Paint Jobs

20,690 Views | 123 Replies | Last: 17 days ago by swampstander
tandy miller
How long do you want to ignore this user?
AG
tandy miller said:

AggieArcher17 said:

Did these 2 with a combo of netting and painters tape a few years ago. Held up great and have been run through the ringer!




Can you explain colors/process for gun in first pic? I might do my Grendel similarly


Ok I understand the layers w stickers… but how'd you do the mesh part? What did you use as a sticker over that when you sprayed the green?

And what kind of green paint did you use?
Justified
How long do you want to ignore this user?
I have a can of dura coat that I bought from midway usa. Never Used O.D. In color. Free located in BCS
Lonestar-aught-six
How long do you want to ignore this user?
Where at I'm planning on painting today.
Justified
How long do you want to ignore this user?
You talking to me? Located in College Station.
Justified
How long do you want to ignore this user?
It's yours. See you later today. Thanks!
Lonestar-aught-six
How long do you want to ignore this user?
Finally did it and it turned out pretty good.
tandy miller
How long do you want to ignore this user?
AG
Lonestar-aught-six said:

Finally did it and it turned out pretty good.


Looks great! Thanks for the pics!
Lonestar-aught-six
How long do you want to ignore this user?
tandy miller said:

Lonestar-aught-six said:

Finally did it and it turned out pretty good.


Looks great! Thanks for the pics!
this site sucks for sharing pic and I have taken any yet. I'll try tomorrow.
tandy miller
How long do you want to ignore this user?
AG
Yeah I use Imgur bc the built in sucks. Can't wait to see how it turns out
fire09
How long do you want to ignore this user?
AG
A couple questions. Did you guys prime these or put a clearcoat on after? Any special brand that holds up better than the other?
fire09
How long do you want to ignore this user?
AG
Double post
Lonestar-aught-six
How long do you want to ignore this user?
fire09 said:

A couple questions. Did you guys prime these or put a clearcoat on after? Any special brand that holds up better than the other?

Didn't clear coat because I was afraid it would be to shiny. Duruacoat takes longer to dry Than rattle can.
Lonestar-aught-six
How long do you want to ignore this user?

Justified
How long do you want to ignore this user?
Man, I feel like I have contributed a lot to this job
Lonestar-aught-six
How long do you want to ignore this user?
Justified said:

Man, I feel like I have contributed a lot to this job

Maybe a little lmao!
BenderRodriguez
How long do you want to ignore this user?
AG
fire09 said:

A couple questions. Did you guys prime these or put a clearcoat on after? Any special brand that holds up better than the other?


No clear coat, no primer. The paint job only looks better as it starts to wear.
fire09
How long do you want to ignore this user?
AG
That looks nice. I bought some duracoat over the weekend and will give it a go sometime this week. Did you disassemble anything or just let her rip fully together (minus suppressor)?
Lonestar-aught-six
How long do you want to ignore this user?
fire09 said:

That looks nice. I bought some duracoat over the weekend and will give it a go sometime this week. Did you disassemble anything or just let her rip fully together (minus suppressor)?

Tape and hung it assembled.
tandy miller
How long do you want to ignore this user?
AG
Lonestar-aught-six said:

fire09 said:

That looks nice. I bought some duracoat over the weekend and will give it a go sometime this week. Did you disassemble anything or just let her rip fully together (minus suppressor)?

Tape and hung it assembled.


Same. Took out safety and taped assist button on one, other let 'er rip
BenderRodriguez
How long do you want to ignore this user?
AG
Next one up

BenderRodriguez
How long do you want to ignore this user?
AG
And done.

tandy miller
How long do you want to ignore this user?
AG
.
tandy miller
How long do you want to ignore this user?
AG
Drank too much. Was cleaning a few guns and was like "why is my charger black?" Too wet to use foliage, so I decided to try a speckle pattern. This is what I ended up w. May change it, may do another layer of each color. will see what it looks like when it dries.



JB!98
How long do you want to ignore this user?
AG
Lonestar-aught-six said:




tandy miller
How long do you want to ignore this user?
AG
Sobered up, sanded down a bit, and repainted. This is what I ended up with. Much happier with this.

Did tan as the base instead of green, and striped before I threw the spatter on.

BenderRodriguez
How long do you want to ignore this user?
AG
Looks good!

Tandy, can report back that rattlecanning a stainless barrel does not hold up nearly as well as it does on other surfaces.

Easy enough to fix, but…
tandy miller
How long do you want to ignore this user?
AG
Really? Haven't had any issues w my 6.5 Grendel
BenderRodriguez
How long do you want to ignore this user?
AG
tandy miller said:

Really? Haven't had any issues w my 6.5 Grendel


Adjustable gas block, so I'm putting a hex key close to the barrel and occasionally making contact.

Not an issue when its a couple layers of paint on a wear area but when its stainless underneath and the rest of the gun is rattlecanned it sticks out
BenderRodriguez
How long do you want to ignore this user?
AG
Another one.

Stencils instead of my usual cut laundry bag this time

Pantera
How long do you want to ignore this user?
AG
welp, there goes my black maverick 88

figure a $250 shotgun is the perfect test subject
Lonestar-aught-six
How long do you want to ignore this user?
Bump. How battle worn do y'all let it get before repainting. She's looking a little rough.
OverSeas AG
How long do you want to ignore this user?
AG
Don't do it.
BenderRodriguez
How long do you want to ignore this user?
AG
Lonestar-aught-six said:

Bump. How battle worn do y'all let it get before repainting. She's looking a little rough.


Ill take some pics for you tomorrow. My mcx and ap5 are looking pretty rough, but i like it.

Have some more stuff I've been thinking about rattlecanning, so timely bump…
Bradley.Kohr.II
How long do you want to ignore this user?
AG
Any of yall recommend a good YouTube video for this? I think I'm definitely doing a gold, silver and metallic red race gun…

Maybe a metallic maroon and silver of if I can find the right color.
Lonestar-aught-six
How long do you want to ignore this user?
Bradley.Kohr.II said:

Any of yall recommend a good YouTube video for this? I think I'm definitely doing a gold, silver and metallic red race gun…

Maybe a metallic maroon and silver of if I can find the right color.

So COD but more pimp?
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.