Have:

Powder - Hunter and AA2200

Request:

7mm-08 dies and/or brass

In Ft Worth. Prefer FTF due to the powder

Anyone have light (100 gr or less) 6.5 they would trade ?

WTB 6x45 seating die

Had a Forster micrometer seating die on order with Midway and they kept pushing delivery date back until they canceled my order.

Forster would be my preference but would consider anything at this point.

Friends,
I am the father of two young men, both graduates of TAMU. They have both been very successful in life. and I am very proud of them. I hope it's ok to join you folks.

I have LR primers, SR primers, LRM primers, LP primers, SP primers, and H414, H110, HP38, W760 powders that I would be willing to swap.

My needs include Alliant Reloader 26 powder, unfired 280 Remington brass (prefer Lapua, Norma, Remington,
Winchester, or Nosler brass), and unfired 7mm SAUM brass. Thanks

.

CS78 said:

---

Two 50 count boxes of 6.5 Speer 120 grain gold dots. These are top notch hunting and defense projectiles. $50 for both in college Station or trade for 300 blackout supersonic powder.

I'm also looking for someone that can load up a few hundred rounds of 300bo. I have the components but my reloading is slow. Can trade, primers, powder, cash.

toledo321 at a0l.c0m

---

I will take these if you will ship at my expense.

Let me see if I can get them sold local at first.

***make offer needs to go***
FS/FT located in BCS.
.243 brass rem and win. 260 rounds
7x57 norma brass 19 rounds
30/06 pmc brass 200 rounds
.30 carbine brass 45-50 rounds
303 British 24 rounds

Also have .357 lead cast bullets not sure of the grain? Will update.
All brass 15 cpr

I'm interested in the cast 357. Have any photos?

I'm not sure of the count? 2-3lbs?

I'll pass on those but thanks for the photo. Good luck swapping/selling!

No problem. They don't look bad, I figured someone could use them for plinking? If you wanna look at them let me know. Thanks

Man...sucks that you are gonna be going through lean times. I had to pawn my TV multiple times in college to make ends meet, so I feel your pain. Hang in there!

Need any 30 carbine brass?

Unfortunately not really, since I don't have any dies.

I have H4350, RE22 and H4831SC if someone wants to trade for some CCI 450's, Fed 210M or Fed 215M. I am located in Austin.

Looking for 1# of Varget

Have several other powders H1000, H4831sc, IMR7828

Have several bullets and primers

.223, 22lr and 9mm ammo

6.5 creedmore federal 140 grain non typical whitetail soft point. $25

Winchester Super X 3 1/2" 12ga 00 buck 3 boxes 14 rounds total. $20

user name at g mail

I've got most of an 8# contain of Varget left if you're in the Houston area.

lexofer said:

---

I've got most of an 8# contain of Varget left if you're in the Houston area.

---

I am in BCS could come down and get it. How much you want or what to trade?

Sig Elite Hunter Nickel Brass. Unfired factory seconds with cosmetic nicks or dings. Primed and ready to load. Measure to 243 case standards.

Have 200 to sell. 50 pictured. Will sell 200 for $150 or 100 for $80.

FTF in DFW or will be in Houston end of June. Text 703-740-75three.nine.

Sorry I didn't write down your number, I just wanted to make sure I still had it before I messaged. I have ~7#, can trade as much or little of it as you want.

I need a lb or 2 of IMR 7828 SSC.

Have cash or can trade SW4350 (I have 8 lbs of it)

Text (903) 505-0470

I'm looking for some BL(C)-2 powder. I use it for my .308. I can pay or trade with Reloder 19.

Or anyone got any good loaded with H414 or H4350? Loading 168gr match hollow points.

Thanks,

ata2084 said:

---

I'm looking for some BL(C)-2 powder. I use it for my .308. I can pay or trade with Reloder 19.

Or anyone got any good loaded with H414 or H4350? Loading 168gr match hollow points.

Thanks,

---

I use H414 in my .243, it is a good powder. Meters well, burns clean.

Deleted, need met

Looking for a 6.5 Grendel die set, preferably Hornady, but RCBS will work as well.

cahoots said:

---

Anyone have a 25-06 die set I can borrow? I can pay shipping and rental fee or powder (4831sc, AA2200, Hunter). Developing some loads to fireform for 25-06 AI.

---

I'll send you a PM

Gone

.

Does anyone have some Winchester WLR primers to spare? I don't have a lot of reloading equip as I've just started but I'll try and trade with whatever I have. Or I could purchase.

TIA

Anyone have some Hornady 325 grain FTX (.458") they would trade for some Hornady ELDM 123 gr 6.5mm?

El Chupacabra said:

---

Anyone have some Hornady 325 grain FTX (.458") they would trade for some Hornady ELDM 123 gr 6.5mm?

---

Dont have Hornady, but have some 325 JHPs in .458

I think I might have some of these. I'll check later tonight and let you know.

schmellba99 said:

---

El Chupacabra said:

---

Anyone have some Hornady 325 grain FTX (.458") they would trade for some Hornady ELDM 123 gr 6.5mm?

---

Dont have Hornady, but have some 325 JHPs in .458

---

Looking specifically for the FTXs for the shorter Leverevolution brass. Thanks though!

45/70 brass anyone? Can't bring myself to pay $1ea on gunbroker.