737 Max in the news again

36,665 Views | 346 Replies | Last: 1 mo ago by nortex97
C@LAg
How long do you want to ignore this user?
Bregxit said:

Hmmm, maybe the lack of nuts in the video is a clue to what happened to the door.
maybe they identify as male?
nortex97
How long do you want to ignore this user?
AG
New/additional video last night;



Notably from the comments, the 900ER's have the same plugs but have been through C-checks to inspect these things already so they aren't on the FAA directive.
Kenneth_2003
How long do you want to ignore this user?
AG
StandUpforAmerica said:

DEI strikes again....


Those are not the booth babes or booth bunnies you were looking for.
NASAg03
How long do you want to ignore this user?
Kenneth_2003 said:

They don't have ANY of the bolts that were supposed to "pin" the door in place.

As to the CVR... NTSB mentioned this the other day and it didn't register with me. When the cockpit door blow open during the depressurization they lost some check lists. They might have lost the emergency landing or after emergency landing checklist. That list would have as the last item, consider pulling the CVR circuit breaker. They may have done a lot from memory items.

But again... The NTSB hasn't found the bolts!


Good video. Concerning all the different failures or design changes that weren't communicated and fell thru the cracks on this type of plane:
  • Loose fasteners attaching the lower plug door hinges to the door frame
  • Missing lower door plug hinge
  • Loose or missing fasteners securing the door plug to the airframe (other aircrafts)
  • Multiple instances of the automatic pressurization control system , switching to manual mode, indicating cabin pressurization issues in the past.
  • Entire cockpit door blowing open vs. door pressure relief panels as is expected
  • Failure to disable the cockpit data recorder, resulting in lost / overwritten flight data
  • Loose or missing fasteners in the rudder control system (other aircrafts)
Mike Shaw - Class of '03
NASAg03
How long do you want to ignore this user?
Mike Shaw - Class of '03
TexasRebel
How long do you want to ignore this user?
AG
tk for tu juan
How long do you want to ignore this user?
Video update covers a letter from FAA to Boeing's VP of QC, plus a civil suit between former Spirit employees (including some quality inspectors) and the company that has some claims they were pressured to accept defective work to get the product delivered without time consuming rework/repairs.

JFABNRGR
How long do you want to ignore this user?
AG
Sounds like they have found multiple plug doors without bolts. Sounds like Boeing and spirit are gonna have to shift their focus to quality and safety over dei bull*****
stetson
How long do you want to ignore this user?
AG
Boeing needs to dump the MBAs and return control to the engineers.
FJB
jkag89
How long do you want to ignore this user?
Stat Monitor Repairman
How long do you want to ignore this user?
https://instagr.am/p/C2DwGv4r8d4

oh no
bmks270
How long do you want to ignore this user?
AG
stetson said:

Boeing needs to dump the MBAs and return control to the engineers.


Lack of engineering involvement in direction also led to the downfall of GE.
Jock 07
How long do you want to ignore this user?
AG
FAA officially investigating Boeing manufacturing practices and production lines.
Beat40
How long do you want to ignore this user?
Jock 07 said:

FAA officially investigating Boeing manufacturing practices and production lines.


Only a matter of time before something like this was going to happen.
swood
How long do you want to ignore this user?
AG
Message to customers from the Alaska Airlines CEO.
JFABNRGR
How long do you want to ignore this user?
AG
Very interesting. CEO states none of the aircraft have been returned to service. Does this mean that the inspection/verification process FAA required to have approved has not been done yet or have their findings been so bad and likely varied, forced a change to the safety directive, that has gone beyond simply the plug door or that even the design is flawed, that hasn't been published yet or did I miss it.
Rapier108
How long do you want to ignore this user?
And we have the media now making a big deal anytime any Boeing built plane has a technical fault.

Last week it was a 737-800 developed a crack in the cockpit window. Absolutely nothing to do with the design or safety of the aircraft. The window was replaced.

Today, Blinken's C-40 (737-700) was found to have an oxygen leak so it was grounded. Fox News has a top page, breaking news headline about the "Boeing built jet" having a problem. Again, has nothing to do with the design of the aircraft.

So many people seem to want to see Boeing go under. Well, if that happens, the US economy goes with it.
"If you will not fight for right when you can easily win without blood shed; if you will not fight when your victory is sure and not too costly; you may come to the moment when you will have to fight with all the odds against you and only a precarious chance of survival. There may even be a worse case. You may have to fight when there is no hope of victory, because it is better to perish than to live as slaves." - Sir Winston Churchill
TexasRebel
How long do you want to ignore this user?
AG
Just wait until a tire gets changed.
Rapier108
How long do you want to ignore this user?
TexasRebel said:

Just wait until a tire gets changed.
Or one pops on landing, which is not an uncommon occurrence on passenger aircraft.
"If you will not fight for right when you can easily win without blood shed; if you will not fight when your victory is sure and not too costly; you may come to the moment when you will have to fight with all the odds against you and only a precarious chance of survival. There may even be a worse case. You may have to fight when there is no hope of victory, because it is better to perish than to live as slaves." - Sir Winston Churchill
Stat Monitor Repairman
How long do you want to ignore this user?
How is it possible for this to be a design defect?

A door blowing off the side of a plane due to bad design doesn't seem like something that would happen in 2024.

Seems more likely that someone didn't install it properly or there were missing parts.
TexasRebel
How long do you want to ignore this user?
AG
Pure speculation, but it seems like as they look at a few planes to see what the inspection process needs to consist of they are finding variances in manufacturing. That basically indicates everything that came from that line is non-conforming crap that shouldn't be allowed in the air because it wasn't manufactured as drawn.
Saxsoon
How long do you want to ignore this user?
AG
stetson said:

Boeing needs to dump the MBAs and return control to the engineers.


As an MBA I agree
Fighting Texas Aggie Class of 2012
Stat Monitor Repairman
How long do you want to ignore this user?
More problems.

Atlas Air 747

https://www.nbcmiami.com/news/local/mayday-video-shows-flames-coming-from-atlas-air-plane-midflight-before-landing-safely-at-mia/3210719/
Bubblez
How long do you want to ignore this user?
Stat Monitor Repairman said:

More problems.

Atlas Air 747

https://www.nbcmiami.com/news/local/mayday-video-shows-flames-coming-from-atlas-air-plane-midflight-before-landing-safely-at-mia/3210719/
An uncontained engine failure is a bit troubling, but that would be a GE issue.
JFABNRGR
How long do you want to ignore this user?
AG
Destination puerto rico was probably quite helpful in light fuel load….assuming they are trusting puerto rican fuel these days.
Rapier108
How long do you want to ignore this user?
Stat Monitor Repairman said:

More problems.

Atlas Air 747

https://www.nbcmiami.com/news/local/mayday-video-shows-flames-coming-from-atlas-air-plane-midflight-before-landing-safely-at-mia/3210719/
Absolutely nothing to do with Boeing.

The media is desperate to trash Boeing anytime a plane they built has a problem, almost all of which have nothing to do with the design or construction.

And people who don't know any better automatically go along with it.
"If you will not fight for right when you can easily win without blood shed; if you will not fight when your victory is sure and not too costly; you may come to the moment when you will have to fight with all the odds against you and only a precarious chance of survival. There may even be a worse case. You may have to fight when there is no hope of victory, because it is better to perish than to live as slaves." - Sir Winston Churchill
tk for tu juan
How long do you want to ignore this user?
Update door plug inspections extend out to 737-900ER variants since they share the door plug design with the 737-Max 9.

Rapier108
How long do you want to ignore this user?
Rapier108 said:

TexasRebel said:

Just wait until a tire gets changed.
Or one pops on landing, which is not an uncommon occurrence on passenger aircraft.
I rarely quote myself, but not that far off. Fox News had a real hardon for Boeing right now, so much so that they are trying to blame them for stuff completely unrelated to the design/manufacture of the aircraft, and completely outside of Boeing's control.

Delta Boeing plane loses nose tire moments before takeoff: 'Rolled off the runway' | Fox Business

And the comment's on the Fox article show just how stupid most people truly are. They just lap up the narrative and blame DEI.
"If you will not fight for right when you can easily win without blood shed; if you will not fight when your victory is sure and not too costly; you may come to the moment when you will have to fight with all the odds against you and only a precarious chance of survival. There may even be a worse case. You may have to fight when there is no hope of victory, because it is better to perish than to live as slaves." - Sir Winston Churchill
Psycho Bunny
How long do you want to ignore this user?
Rapier108 said:

Rapier108 said:

TexasRebel said:

Just wait until a tire gets changed.
Or one pops on landing, which is not an uncommon occurrence on passenger aircraft.
I rarely quote myself, but not that far off. Fox News had a real hardon for Boeing right now, so much so that they are trying to blame them for stuff completely unrelated to the design/manufacture of the aircraft, and completely outside of Boeing's control.

Delta Boeing plane loses nose tire moments before takeoff: 'Rolled off the runway' | Fox Business

And the comment's on the Fox article show just how stupid most people truly are. They just lap up the narrative and blame DEI.
Liberal tears taste so sweet.
FarmerJohn
How long do you want to ignore this user?
AG
Quote:

The media is desperate to trash Boeing anytime a plane they built has a problem, almost all of which have nothing to do with the design or construction.
Those of us working in oil and gas back in 2010 understand. It may not have been your fault, but it is your problem.
Kenneth_2003
How long do you want to ignore this user?
AG
tk for tu juan said:

Update door plug inspections extend out to 737-900ER variants since they share the door plug design with the 737-Max 9.


The odd thing about this is that all of the 900ER are old enough that they would have already gone through an inspection cycle that would include removing all of the interior furnishings to enable a detailed inspection of the fuselage structure.

So any issues with the fasteners should have been caught during that inspection and any defects or shortcomings (if maintenance opened or removed the door plug) would there foreaward be on the carrier and their maintenance personnel; not on Boeing.
Kenneth_2003
How long do you want to ignore this user?
AG
Bubblez said:

Stat Monitor Repairman said:

More problems.

Atlas Air 747

https://www.nbcmiami.com/news/local/mayday-video-shows-flames-coming-from-atlas-air-plane-midflight-before-landing-safely-at-mia/3210719/
An uncontained engine failure is a bit troubling, but that would be a GE issue.
Juan Brown (Blancolirio) did a video about this, and that GE Engine. At one time that engine had an accelerated maintenance inspection of the the low pressure shaft as it apparently had a problem with failure.

He asked in his video if anyone was aware if this increased inspection cadence was still in place or if it had been relaxed due to an enhancement or work done by GE. This engine is also used in many of the 787.
nortex97
How long do you want to ignore this user?
AG
There is absolutely nothing unsafe about the GenX engine family, let alone the 747-8. This was a fairly 'common' sort of thing, that looked exciting from the ground at night.

hgc159
How long do you want to ignore this user?
tk for tu juan said:

Update door plug inspections extend out to 737-900ER variants since they share the door plug design with the 737-Max 9.


That photo shows just how much goes into inspecting for this. Have to remove at least 2 rows of seats, a wall panel, and the insulation behind it. Should have been done before any of that was installed initially.
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.