Impact Precision Golf in woodlands/spring area
Aggie369 said:
Impact Precision Golf in woodlands/spring area
93MarineHorn said:Have to disagree here. I was fitted for my current driver,'17 M1, at Club Champion. The stats said this was the club, but there were other clubs that felt better to me. It was great at first but it didn't take long for the shots that didn't feel so good to end up not being very good. It wrecked my confidence and I started spraying my drives. I went back to my '13 Titleist driver and hit much more accurate drives, albeit a little shorter.Quote:
This is how its done....be broad in describing what u want. Let trackman show you what you need
When I get my next driver, I'm going to make sure I get fit in an outdoor setting. I want to see and feel my shots and pick the club that suits me personally, not get hung up on stats. Let the fitter worry about the stats, you focus on what feels/looks right.
EastTexAg14 said:
In the Houston area I highly recommend Swanson Golf. I would ask to have your fitting done with Daryl Parrott. Very knowledgeable and does not push any specific manufacture on you. I did an iron fitting two months ago and completed a wedge fitting last week.
oldag00 said:
Good to hear.
I'm looking to replace my full bag of clubs. I've got $750 in pro shop credit I need to use to accomplish some of that though. Do they provide you your spec sheet to allow buying clubs elsewhere?
With their custom build process, which I know has advantages over the assembly line, how did their pricing compare to MSRP or other retailers?
Lt. Joe Bookman said:
Any experience with Golf Tech in Plano? Looks like a driver fitting is only $50 through them... which seems crazy cheap so I'm a bit skeptical?
Lt. Joe Bookman said:
Any experience with Golf Tech in Plano? Looks like a driver fitting is only $50 through them... which seems crazy cheap so I'm a bit skeptical?
Lt. Joe Bookman said:
Any experience with Golf Tech in Plano? Looks like a driver fitting is only $50 through them... which seems crazy cheap so I'm a bit skeptical?
Really nice improvement, should get you 250ish carry which is plenty.Quote:
Club head speed was 103-105 mph, but ball speed with my old driver was only 130 mph with 5000+ rpm spin. Went up to 150 mph with with 2800 rpm spin.
Forum Troll said:Really nice improvement, should get you 250ish carry which is plenty.Quote:
Club head speed was 103-105 mph, but ball speed with my old driver was only 130 mph with 5000+ rpm spin. Went up to 150 mph with with 2800 rpm spin.
07fta07 said:
I'm amazed you are only at 2800 RPM with an attack angle that negative. I was pushing 3000 at around a -4.
New shaft and getting the angle closer to 0 has me down to 2200-2300.
This. Done this twice with irons and fairway woodsE said:
Try a Titleist Thursday's... they do free fittings at select ranges/courses
Got my kbs tour x-stiff on ebay from a reputable site for about 26$ a shaft. Then 13 tour velvets midsize for 72$. Had to buy my driver and 3w head used from other places, but got the shafts on ebay as well.ruddyduck said:
ok...got fit. great experience. as many here said would be the case, the amount they charge seems pretty crazy.
being 6'6" and needing lengthened, extra stiff shafts and larger grips, is there anywhere online to accomplish all of that without paying through the nose?
ruddyduck said:
ok...got fit. great experience. as many here said would be the case, the amount they charge seems pretty crazy.
being 6'6" and needing lengthened, extra stiff shafts and larger grips, is there anywhere online to accomplish all of that without paying through the nose?
khaos288 said:Got my kbs tour x-stiff on ebay from a reputable site for about 26$ a shaft. Then 13 tour velvets midsize for 72$. Had to buy my driver and 3w head used from other places, but got the shafts on ebay as well.ruddyduck said:
ok...got fit. great experience. as many here said would be the case, the amount they charge seems pretty crazy.
being 6'6" and needing lengthened, extra stiff shafts and larger grips, is there anywhere online to accomplish all of that without paying through the nose?
Overall spent less than 900, was quoted 2200 from the shop