Sudden water pressure increase?

1,675 Views | 13 Replies | Last: 2 days ago by dubi
Tom Cardy
How long do you want to ignore this user?
AG
This morning and throughout today we have noticed a big increase in water pressure in Woodcreek. Anyone else seeing this around town?
agcot12
How long do you want to ignore this user?
AG
Live near that area and noticed the pressure being a lot higher the last two days. Hope it holds as we've had issues the last two years with our irrigation system due to low pressure and all they could tell me is that it was a "known issue".
Tom Cardy
How long do you want to ignore this user?
AG
Opposite for us, we're now at 95psi and it's causing some issues with the fridge water line and a couple faucets
techno-ag
How long do you want to ignore this user?
AG
Maybe the rain? I kid, but glad to see the rain.
Trump will fix it.
agcot12
How long do you want to ignore this user?
AG
Turn the pressure regulator down at the street. Should be right after the water meter. Mine is in a round green irrigation box.
Tom Cardy
How long do you want to ignore this user?
AG
we don't have a PRV, and I'm not keen on paying for one if the city continues to cause the fluctuations in pressure
happyinBCS
How long do you want to ignore this user?
you need one, I installed mine and it was easy, you won't have a problem anymore I set mine on 60psi
agcot12
How long do you want to ignore this user?
AG
I guess city code requires one. Last house I sold it came up on the inspection and I had to install one to appease buyer and their lender.
EBrazosAg
How long do you want to ignore this user?
AG
Just remember PRVs don't last forever. It's a spring and diaphragm design. I've seen mine last 7-10 yr over 3 decades
No material on this site is intended to be a substitute for professional medical advice, diagnosis or treatment. See full Medical Disclaimer.
JP76
How long do you want to ignore this user?
PRV in CS has been code on new builds for 20+ years

Be aware if you don't have one currently and install one you are changing your water supply to a closed system. A closed system requires an expansion tank on the water heater or a code compliant shut off valve that has a bypass for pressure build up built into it.
Tom Cardy
How long do you want to ignore this user?
AG
Our build was before the code requirement, so we wouldn't necessarily be required to have one unless the city inspected/tested pressure and found it to be out of compliance.

What's frustrating is that our pressure was fine and then suddenly went much higher 2 days ago, which may force me into spending on a fix
txgardengirl
How long do you want to ignore this user?
I wonder if water pressure had anything to do with the pipe bursting at Pebble Creek elementary? We have a PRV so I haven't noticed any changes
happyinBCS
How long do you want to ignore this user?
you would assume a big commercial building would have a regulator although they can fail
I just checked here in Woodcreek it is at 90psi on an unregulated pool house
dubi
How long do you want to ignore this user?
AG
agcot12 said:

Turn the pressure regulator down at the street. Should be right after the water meter. Mine is in a round green irrigation box.
Most older houses do not have a pressure regulator.
Refresh
Page 1 of 1
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.