I'm an absentee landowner of a rural property about an hour away from where I now live. Back in 2008, I started construction of a cabin. No sooner did we get it framed up and dried in did someone kick the front door in and ransack the place looking for stuff to steal. I promptly lost interest in it and have let it go to hell.
Fast forward seven years and a nasty 1969 model Avion camper and I started getting the itch to have some lodging of some sort again. At first I considered building smaller, lower profile cabins further back into the property. I was living about five hours from the place at the time and construction of that level just wasn't something I felt confident we could accomplish. Plus, as usual, I've always been on a pretty small budget for this place. I did quite a bit of research on shipping container cabins and decided that was the best option. They're immediately wind and water tight. They're secure. They're rodent proof (the camper sure wasn't). I bought all three containers from Xcaliber Container in Graham for $7,200 plus tax delivered.
Our relocation back in November 2015 brought us closer than ever before to the property and we got to work on finishing out the cabins once we got settled at home. I've been through a number of design iterations and they certainly aren't finished yet, but I figured some of y'all might appreciate seeing the progress so far.
The cabins are 8'x20' and I've finished the inside with 2x4 framing 24" O.C., batt insulation, and hardboard paneling. I installed 6,000 Btu window units. Each of them are powered by 2,800 watt Champion inverter generators and, when finished, will have queen sized bunks installed at the rear and a small closet for a portable toilet up front. The total square footage comes in at ~131 SF. We had the door shut this past weekend while we paneled the interior and the A/C unit kept up just fine. Heating them with 1,500 watt space heaters in the winter should be no problem.
On to the photos...
Didn't snap a picture after I cut the last piece of siding...
From here, I've got one more panel to install, laminate flooring to install, a closet to frame out, trim, electrical, storm doors, and bunks. I decided to run the electrical in metal conduit surface mounted to the walls. Plus, each of them will get smoke detectors and fire extinguishers.
At the end of the day, I expect each of them to be in the $3,500 - 4,000 range each on total cost.
Fast forward seven years and a nasty 1969 model Avion camper and I started getting the itch to have some lodging of some sort again. At first I considered building smaller, lower profile cabins further back into the property. I was living about five hours from the place at the time and construction of that level just wasn't something I felt confident we could accomplish. Plus, as usual, I've always been on a pretty small budget for this place. I did quite a bit of research on shipping container cabins and decided that was the best option. They're immediately wind and water tight. They're secure. They're rodent proof (the camper sure wasn't). I bought all three containers from Xcaliber Container in Graham for $7,200 plus tax delivered.
Our relocation back in November 2015 brought us closer than ever before to the property and we got to work on finishing out the cabins once we got settled at home. I've been through a number of design iterations and they certainly aren't finished yet, but I figured some of y'all might appreciate seeing the progress so far.
The cabins are 8'x20' and I've finished the inside with 2x4 framing 24" O.C., batt insulation, and hardboard paneling. I installed 6,000 Btu window units. Each of them are powered by 2,800 watt Champion inverter generators and, when finished, will have queen sized bunks installed at the rear and a small closet for a portable toilet up front. The total square footage comes in at ~131 SF. We had the door shut this past weekend while we paneled the interior and the A/C unit kept up just fine. Heating them with 1,500 watt space heaters in the winter should be no problem.
On to the photos...
Didn't snap a picture after I cut the last piece of siding...
From here, I've got one more panel to install, laminate flooring to install, a closet to frame out, trim, electrical, storm doors, and bunks. I decided to run the electrical in metal conduit surface mounted to the walls. Plus, each of them will get smoke detectors and fire extinguishers.
At the end of the day, I expect each of them to be in the $3,500 - 4,000 range each on total cost.