Home Improvement
Sponsored by

Plumbing part help

981 Views | 9 Replies | Last: 5 mo ago by UmustBKidding
bam02
How long do you want to ignore this user?
AG
We have a refrigerator that we keep in our utility room and I would like to run water to it for the icemaker. The only water source in that room is for the washing machine. Does anybody know if there is a part that is made to split off of the line that goes to a washing machine that could divert water for this purpose? or I guess it is unlikely there is something made specifically for this, but does anybody have any ideas? I can post pics of what I am dealing with if that helps.
BenTheGoodAg
How long do you want to ignore this user?
AG
I'm sure there are a lot of options. Washing machine valve is likely 3/4" FHT? Fridge needs a 1/4" compression fitting?

Could split the valve (Example) and then convert one to compression (Example), and then run a supply line to the fridge (Example).
JP76
How long do you want to ignore this user?
You need a 3/4 tee, a 3/4 nipple and a reducer from 3/4 to 1/2, then a 1/2 nipple and a quarter turn valve with a 1/4 inch compression for the fridge line

Roy D Mercer
How long do you want to ignore this user?
They used to make a faucet that would screw on an outside faucet that had a 1/8" pipe thread side outlet. It was designed to screw onto a water hose thread. Used to see them on houses that had a swamp fan
FatZilla
How long do you want to ignore this user?
AG
Y split to 1/4 compression. Used this exact setup before to split washing machine cold water line for my old fridge.

Triumpeek Brass Garden Hose Splitter, 3/4 Inch 2-Way Y Brass Hose Connector https://a.co/d/8z9avsL

ZKZX 3/4" GHT Garden Hose Thread Female to 1/4" OD Compression Brass Connector, Faucet to Hose Adapter 2PCS https://a.co/d/91NZXY5
bam02
How long do you want to ignore this user?
AG
Thanks y'all! I'll try to set this up this weekend. Should have done it a long time ago! This fridge has been in here for 3 years without a water connection. Hope the ice maker still works.
javajaws
How long do you want to ignore this user?
AG
You need a 3/4" wye with a valve on each - can find these at the hardware store in brass.

Then if your ice maker has a 1/4" RO input you need one of these to convert to a 1/4" RO line most likely (check your ice maker):

https://www.sal****eraquarium.com/1-4-mur-lok-tube-to-3-4-garden-hose-utility-sink-adapter/
bam02
How long do you want to ignore this user?
AG
Is RO reverse osmosis? I don't think it has anything fancy beyond a cartridge filter but I don't know.
javajaws
How long do you want to ignore this user?
AG
bam02 said:

Is RO reverse osmosis? I don't think it has anything fancy beyond a cartridge filter but I don't know.


RO stands for reverse osmosis but a lot of fridges, etc use 1/4" RO plumbing lines to connect. Just look at your ice maker and see what connector it has for water hookup.
UmustBKidding
How long do you want to ignore this user?
There are a multitude of ways to do this but at one point had a male to female hose thread device that had a 1/4 or maybe 3/8 female on the side for a compression fitting. Think it was to hook a dryer that had steam option to the normal washer hose that typically would be next to it.
Refresh
Page 1 of 1
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.