Home Improvement
Sponsored by

Ceiling Fan setup for 20ft ceiling

1,697 Views | 4 Replies | Last: 1 yr ago by krosch11
aaronag02
How long do you want to ignore this user?
Any one have advice on how to configure a ceiling fan for a 20ft ceiling? Current have a chandler that hangs at about 7 ft down . The online recommendations are for a 120 inch downrod but no one sells one over 72 inch's.
maddiedou
How long do you want to ignore this user?
AG
Go to plumbing company and get 3/4 threaded pipe
Then cut and drill hole in the end and get spray paint and paint a color of choice
maddiedou
OlRock
How long do you want to ignore this user?
AG
They sell extension rods for ceiling fans. You can fab one at a custom height too. Fab, like drill holes through the non threaded end.
evan_aggie
How long do you want to ignore this user?
AG
Yup!

We ended up using a 6' and maybe a 2' together.

MinkaAire has quite a few options.
krosch11
How long do you want to ignore this user?
AG
I don't know if it helps at all but we have 15 ft ceilings and old fan had a 6 ft down rod. Bought a large minka aire fan and used the stock 18inch down rod and it's plenty long enough. Fan moves a mountain of air and opened up the room. I bet you could get by easily with a 6 foot.

https://www.homedepot.com/p/MINKA-AIRE-Xtreme-H2O-65-in-Indoor-Outdoor-Oil-Rubbed-Bronze-Ceiling-Fan-with-Remote-Control-F896-65-ORB/310213814
Refresh
Page 1 of 1
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.