Our WeatherMaker 8000TS is finicky on when it starts up and heats the house. I'm not sure whether to start with it or the thermostat. Thermostat is a general looking Honeywell.
75% of the time when the digital temp drops to below the thermostat setting, the WeatherMaker kicks on just fine. But about 25% of the time it does not.
The thermostat appears fine. If set at 73, and temp on it drops to 72, it makes a click sound and the 'ON' letters appear for heat. It consistently does this as normal. But the WM most of the time follows and turns on, and some of the time it does nothing. It's not until some time hours afterward does it finally kick on and heat the house.
It never gets to about more than 5 or 6 degrees below the setting temp before turning on.
I'm not sure where to start. I am pretty decent at DIY and would like to fix this myself.
75% of the time when the digital temp drops to below the thermostat setting, the WeatherMaker kicks on just fine. But about 25% of the time it does not.
The thermostat appears fine. If set at 73, and temp on it drops to 72, it makes a click sound and the 'ON' letters appear for heat. It consistently does this as normal. But the WM most of the time follows and turns on, and some of the time it does nothing. It's not until some time hours afterward does it finally kick on and heat the house.
It never gets to about more than 5 or 6 degrees below the setting temp before turning on.
I'm not sure where to start. I am pretty decent at DIY and would like to fix this myself.