FS - Amana Split System Central Air Conditioner

2,382 Views | 12 Replies | Last: 5 mo ago by hawk-aggie
hawk-aggie
How long do you want to ignore this user?
AG
SOLD
hawk-aggie
How long do you want to ignore this user?
AG
Bump
hawk-aggie
How long do you want to ignore this user?
AG
Reduced to $1200
JP76
How long do you want to ignore this user?
Is there a furnace too ? Or is it electric heat or heat pump ?
carl spacklers hat
How long do you want to ignore this user?
Information for the uninitiated:

The manufacture year is 2015, per the serial number, and is a 4-ton system. Aluminum tubes, not copper, and takes either R-22 or 410A, which is a bit unusual as R-22 is now phased out of use. Buyer should probably ask for a leak test of the coils prior to purchase and what type of refrigerant the system ran before decommissioning.
People think I'm an idiot or something, because all I do is cut lawns for a living.
Bluto
How long do you want to ignore this user?
AG
Uninitiated here:
Is this big enough for a 1600 sq ft, 3/2, 1 story home? And regarding power, is this geared more towards a commercial building? I'm wondering what adjustments would need to be made to residential power for a home built in 1978.

Thanks for the information already provided.
hawk-aggie
How long do you want to ignore this user?
AG
Bluto said:

Uninitiated here:
Is this big enough for a 1600 sq ft, 3/2, 1 story home? And regarding power, is this geared more towards a commercial building? I'm wondering what adjustments would need to be made to residential power for a home built in 1978.

Thanks for the information already provided.
According to the info we got with the unit, it was working perfectly when it was removed from service. It was only replaced because the home was added on to. It is a residential unit. There are experts reading these threads who would know better than me, but I believe this unit would be more than adequate for a 1600 sq ft home. According to the sticker shown in one photo, this is the cooling system only. I'll have to check to see if there's a heating section in the stack.
hawk-aggie
How long do you want to ignore this user?
AG
JP76 said:

Is there a furnace too ? Or is it electric heat or heat pump ?
I'll need to check for a heating section.
ukbb2003
How long do you want to ignore this user?
hawk-aggie said:

JP76 said:

Is there a furnace too ? Or is it electric heat or heat pump ?
I'll need to check for a heating section.


The coil is sitting on top on the condenser and the furnace is on the left in the first picture.
ukbb2003
How long do you want to ignore this user?
hawk-aggie said:

Bluto said:

Uninitiated here:
Is this big enough for a 1600 sq ft, 3/2, 1 story home? And regarding power, is this geared more towards a commercial building? I'm wondering what adjustments would need to be made to residential power for a home built in 1978.

Thanks for the information already provided.
According to the info we got with the unit, it was working perfectly when it was removed from service. It was only replaced because the home was added on to. It is a residential unit. There are experts reading these threads who would know better than me, but I believe this unit would be more than adequate for a 1600 sq ft home. According to the sticker shown in one photo, this is the cooling system only. I'll have to check to see if there's a heating section in the stack.


You would need to have a load calculation done. 4 tons would typically be too big for 1600 sq. feet unless you have a lot of single pane glass and little insulation.
hawk-aggie
How long do you want to ignore this user?
AG
If you are interested, come look at it and make a deal.
hawk-aggie
How long do you want to ignore this user?
AG
bump
hawk-aggie
How long do you want to ignore this user?
AG
SOLD
Refresh
Page 1 of 1
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.