Restoring an old Cotton Gin

13,843 Views | 86 Replies | Last: 3 yr ago by The Fife
stbabs
How long do you want to ignore this user?
AG
Dr. Doctor said:

Could you hook up an electric motor to the old steam motor? Essentially make it look like the steam motor is driving, but really with electric motor?

~egon
Yes, but not with enough power to run the gin. Plan is to actually run the gin with the Hercules, assuming I'm able to get it running, and run the old steam engine on compressed air as a demo only.
I'm looking at a Fairbanks Morse engine as a backup if the Hercules isn't rebuildable.
But, I'm pretty confident we can make the Herc run again with enough time and $$$.
The Fife
How long do you want to ignore this user?
If you need parts where do you go for stuff that fits a 100 year old engine?
stbabs
How long do you want to ignore this user?
AG
The Fife said:

If you need parts where do you go for stuff that fits a 100 year old engine?
Valve blanks and guides are available. Ditto for rings. Pistons can be made.

Cracks in unreplaceable parts can usually be welded. I have a few

Two cylinders will need sleeves. Industrial machine shop in Houston for that.

Magneto is repairable

For sure you can't just run down to NAPA!

BenTheGoodAg
How long do you want to ignore this user?
AG
What a cool project. Nice work so far!
cmiller00
How long do you want to ignore this user?
AG
Awesome work.
Burdizzo
How long do you want to ignore this user?
AG
I have always read Marvel Mystery Oil is a good soak for stuck engines too.
stbabs
How long do you want to ignore this user?
AG
Burdizzo said:

I have always read Marvel Mystery Oil is a good soak for stuck engines too.


Marvel is good. Seems I may have used some then topped it off with ATF and acetone. Tops of my pistons were so rusted that nothing penetrated far enough to do much good.

An oak block and a sledge eventually broke them free.

Block is now stripped and ready for the hot tank and machining.

I found new valves for it. An old engine guy in North Dakota has valve blanks that'll work.

Block goes to the machine shop next week.

I'll work on the magneto and starter while it's being machined.
stbabs
How long do you want to ignore this user?
AG
Saws on one stand running true with good alignment inside the ribs (green things)

stbabs
How long do you want to ignore this user?
AG


One of the three gin stands assembled, less feed chutes and front cover (door)

Wonder if anyone has even wet sanded and buffed a cotton gin before??? I just did.
stbabs
How long do you want to ignore this user?
AG


And what it looked like when we started.
Dr. Doctor
How long do you want to ignore this user?
dubi
How long do you want to ignore this user?
AG
Amazing!
chris1515
How long do you want to ignore this user?
AG
This is damn cool.

Stbabs, what is your background in this sort of endeavor?
stbabs
How long do you want to ignore this user?
AG
chris1515 said:

This is damn cool.

Stbabs, what is your background in this sort of endeavor?
No relevant background at all except growing up under the tutelage of a part time farmer/rancher who could fix anything. Myself, I'm a retired Marine officer who spent 31 years breaking things, not fixing them.

I do love the restoration process; bringing something old back to life.

I've been able to find some others guys with cotton gin knowledge who have been very helpful. Roy Childers, from CS, retired from Agrilife came over to advise and Dan Taylor, semi-retired farmer/ginner from Lubbock actually drove 500 miles to bring me a part I was missing.

Patience, research, some mechanical skill, learn as you go.. but mostly being a hard headed, never quit sum beech is the key.
agfan2013
How long do you want to ignore this user?
AG
stbabs said:

Dan Taylor, semi-retired farmer/ginner from Lubbock actually drove 500 miles to bring me a part I was missing.


Awesome guy. I was just at Dan's barn outside of Lubbock about a month ago for a dinner and presentation on the cotton industry. He's got a small museum on his property with cotton gin memorabilia.

Not surprised at all to hear he helped you out, him and his wife Linda are great people.



stbabs
How long do you want to ignore this user?
AG
Yep, on all counts.
WildAg08
How long do you want to ignore this user?
AG
Dan and Linda Taylor, and their place are a real treasure for Texas Cotton and Agriculture as a whole.
The Fife
How long do you want to ignore this user?
And now it's starting to make sense how my great grandfather lot an arm to one of those things around the turn of the century.
 
×
subscribe Verify your student status
See Subscription Benefits
Trial only available to users who have never subscribed or participated in a previous trial.