Thank you! I'm just doing what I enjoy doing!

Hello everyone, for anyone interested I am back in college station and ready to sharpen!

Gonna be around on Sunday, February 21st?

Coog97 said:

---

Gonna be around on Sunday, February 21st?

---

Yes, I should be.

Good deal! Will reach out shortly before then.

If you're doing hand planes and chisels, look into the Veritas honing guide (made for chisels) and the scary sharp system from Taylor Toolworks. The scary sharp system uses special lapping sheets (essentially sandpaper, but not the stuff you find in the painting aisle) applied over float glass and goes up to 60,000 grit, which is finer than stropping compound. The lapping sheets last quite awhile and are pretty cheap to replace.

ABATTBQ11 said:

---

If you're doing hand planes and chisels, look into the Veritas honing guide (made for chisels) and the scary sharp system from Taylor Toolworks. The scary sharp system uses special lapping sheets (essentially sandpaper, but not the stuff you find in the painting aisle) applied over float glass and goes up to 60,000 grit, which is finer than stropping compound. The lapping sheets last quite awhile and are pretty cheap to replace.

---

Thanks for the tip! At this point I have only done a handful of them so the attachment for my edge pro is sufficient but it's good to know there is better stuff out there!