I'm selling my 1993 Jeep Wrangler (YJ). The Jeep was originally purchased in New Mexico and then brought to Florida. I had the jeep inspected in Florida and then shipped to Texas in 2018; I'm the third owner and have a clean title in my name. There is no rust.
Craigslist Ad
The Jeep has the 4.0 six cylinder and about 153,000 miles. It's lifted ~4.5" and has new 33" mud terrains along with the following modifications. All the maintenance work was performed by a local shop and Lonestar Axle did the lift and drivetrain work; I have receipts for all the work and parts.
- BDS 3.5" leaf spring lift with NX2 Nitro shocks
- Mountain Off-Road 5/8" Lift Boomerang Lubeable shackles
- Sway Bar disconnects
- New steering stabilizer
- New drop Pitman arm
- New Mickey Thompson (Deagan38) 33x12.50x15" Mud Terrain tires
- Smittybilt SRC Classic Rock Crawler Front Bumper
- Smittybilt SRC Classic Rock Crawler Rear Bumper with tire carrier and a fullsize (33x12.50) spare
- New Headlights (brighter than stock)
- 2 cube lights (Cali Raised LED) on the windshield frame
- Lux Lighting magnetic rock lights in each wheel well
- Central switch panel with customizable icons for different lights, lockers, etc. Currently using this for my rear locker, rock lights, and the cubes.
- New TJ fender flares for a cleaner look and more clearance (Jeep will clear 35" tires)
- 4.56 gears front and rear (All work done at Lonestar Axle)
- Rebuilt Ford 8.8 rear end with Eaton electric locker. Swap and rebuild was done by Lonestar Axle in July 2019 with new spring plates, E-brakes, etc. Essentially a new axle.
- Rebuilt front Dana 30 axle with CAD block off plate and a powertrax grip pro limited slip. The driver's side axle was replaced with a TJ axle to eliminate the vacuum actuated 4x4. (All work done at Lonestar Axle).
- TeraFlex 2-Low kit and Short Shaft SYE Eliminator kit with new rear drive shaft. The 2-Low kit allows for 2H, 2L, 4H, and 4L (installed by Lonestar Axle)
- All new fluids front and rear axles, transfer case, and engine
- New valve cover gasket
- New oil pan gasket and cleaned oil screen
- New gas tank, rubber fuel lines, sending unit, vents, and gasket(s)
- New radiator, coolant, thermostat, and thermostat housing
- New Kenwood Bluetooth, USB Radio
- New Bikini Top
- Existing soft top and frame (frame needs a little work but still fits and works well)
Asking $13,500 OBO. Call or text 713 four four seven 7139
Craigslist Ad
The Jeep has the 4.0 six cylinder and about 153,000 miles. It's lifted ~4.5" and has new 33" mud terrains along with the following modifications. All the maintenance work was performed by a local shop and Lonestar Axle did the lift and drivetrain work; I have receipts for all the work and parts.
- BDS 3.5" leaf spring lift with NX2 Nitro shocks
- Mountain Off-Road 5/8" Lift Boomerang Lubeable shackles
- Sway Bar disconnects
- New steering stabilizer
- New drop Pitman arm
- New Mickey Thompson (Deagan38) 33x12.50x15" Mud Terrain tires
- Smittybilt SRC Classic Rock Crawler Front Bumper
- Smittybilt SRC Classic Rock Crawler Rear Bumper with tire carrier and a fullsize (33x12.50) spare
- New Headlights (brighter than stock)
- 2 cube lights (Cali Raised LED) on the windshield frame
- Lux Lighting magnetic rock lights in each wheel well
- Central switch panel with customizable icons for different lights, lockers, etc. Currently using this for my rear locker, rock lights, and the cubes.
- New TJ fender flares for a cleaner look and more clearance (Jeep will clear 35" tires)
- 4.56 gears front and rear (All work done at Lonestar Axle)
- Rebuilt Ford 8.8 rear end with Eaton electric locker. Swap and rebuild was done by Lonestar Axle in July 2019 with new spring plates, E-brakes, etc. Essentially a new axle.
- Rebuilt front Dana 30 axle with CAD block off plate and a powertrax grip pro limited slip. The driver's side axle was replaced with a TJ axle to eliminate the vacuum actuated 4x4. (All work done at Lonestar Axle).
- TeraFlex 2-Low kit and Short Shaft SYE Eliminator kit with new rear drive shaft. The 2-Low kit allows for 2H, 2L, 4H, and 4L (installed by Lonestar Axle)
- All new fluids front and rear axles, transfer case, and engine
- New valve cover gasket
- New oil pan gasket and cleaned oil screen
- New gas tank, rubber fuel lines, sending unit, vents, and gasket(s)
- New radiator, coolant, thermostat, and thermostat housing
- New Kenwood Bluetooth, USB Radio
- New Bikini Top
- Existing soft top and frame (frame needs a little work but still fits and works well)
Asking $13,500 OBO. Call or text 713 four four seven 7139