Hey Guys,

I think I have settled on the scopes for the two rifles I bought but didn't realize I would have so many options for scope rings. I decided to go with two different scopes for a little variety/see which I liked more. Any guidance on rings would be appreciated.

Gun 1:
CZ 455 Varmit 22 lr.

Scope:
https://www.opticsplanet.com/leupold-vx-freedom-2-7x33-1-inch-riflescopes.html

Rings:
After reading online some suggested the high rings to give adequate room to operate the bolt. Any thoughts on that? Those that own the rifle or sell the rifle (eyeguy) what would ya'll recommend? Was looking at these in high:

https://www.opticsplanet.com/talley-1in-rimfire-ring.html?_iv_code=9E-RR-1RR-22CZRH

Gun 2:
Ruger 10/22 Carbine

Scope:
https://www.opticsplanet.com/nikon-p-rimfire-2-7x32-riflescope.html

Rings:
These in either low or high but wouldn't mind a qd mount so I can also shoot with the irons

https://www.opticsplanet.com/vortex-1-inch-riflescope-rings.html

Other suggestions?
Thanks in advance.

Talley Rings and bases. I have Talley on all my rifles.

http://www.talleymanufacturing.com/

I like Talleys, generally. I've got them on an 8# 300 Win Mag, 7mm Rem Mag, 7mm-08, 308 Win and various others. Never had an issue, even after 250+ rounds on the Win Mag everything is good.

I have an old pair of Millet Angle Locks that have been on one of my favorite deer rigs for 15 years this year. Never lost zero and I really have been happy with those. They are a bit lower profile than typical weaver style rings.

I've also had good luck with DNZ products, but only on AR15s. They hold up well, hold zero, and are light. They look bulky though.

With regard to the CZ, You can send the bolt in and they will bend it to where you can use a normal height set of rings.

https://www.midwayusa.com/product/3011111828/dnz-hunt-master-2-piece-scope-mounts-with-integral-rings-remington-700-howa-1500-weatherby-vanguard

+1 on DNZ Hunt Masters.

Spuhr

I actually went with a weaver style scope ring as I found a weaver style rail mount for my 455.

I went w Barrett zero-gap rings and they're rock solid. I'll be using them for sure on future guns.

Lol @ Sphur.

We've reached a new, special place when a suggested mount costs more than the gun it's on.

You don't spend $400-500 on your scope mounts?

TPS TSR Sporting Optic Rings in whatever height you need. They work really well and go on easy.

PFG said:

---

Lol @ Sphur.

We've reached a new, special place when a suggested mount costs more than the gun it's on.

---

+1 on Spuhr