PRICE DROPS 8/31

Have the following for sale. Prices include CONUS shipping.

PING Anser 9.5* head and adapter - SOLD

Oban Kyoshi White 65-05 (Xflex) - driver length, measures 43.5" when used in a club with an adapter/sleeve (43" without). Has a .335 tip. Virtually brand new, has only seen the course once or twice and the range twice.
EDIT $200

PING i20 3-wood 14* - currently unshafted, but I have the Project X Black 6.5 that came with it. I can sell the head only, head and shaft unassembled, or I can put it in for you.
EDIT $35 head/$70with shaft

Vokey Spin Milled CC - SOLD


Shafts:

Project X Black 6.5 .350 tip 3wood shaft pulled from the Ping i20 listed above. Measures 42" from grip to tip of the adapter has a TM SLDR tip on it, but I can pull it off if needed. I believe the tip adds 1/2", so shaft itself is 41.5" grip to tip. Very good condition.
EDIT $50 with adapter/$40 without

UST Mamiya AxivCore Tour 100-x hybrid shaft, .370 tip and currently has a TM SLDR hybrid tip on it. With adapter, measures 39.5" grip to tip (39" with adapter removed). Very good condition.
EDIT $40 with adapter/$35 without

hDiamana hybrid shaft with TM TP graphics. Stiff flex, .355 tip, measures 39.75 grip to tip (no adapter). This is a GREAT hybrid shaft, I just don't have a club to put it in. Has some small scratches near the tip, but nothing major. Grip needs to be replaced.
EDIT - Today I put an SLDR adapter on to try in my rescue, so I may just keep it.

[This message has been edited by 1208hawktree (edited 8/31/2014 3:16p).]

Here are some pics. I'm sorry they are so huge, but I'm in my phone and I can't find a way to resize them. At least you can see details.

Oban Kyoshi - Tip prep area and overall length shown.





[This message has been edited by 1208hawktree (edited 8/19/2014 1:40a).]

Rest of it.

i20: shaft is in with the others (pics below).







Shafts: just noticed that there appears to be a big difference in the two TM adapters. The far left one is in the shade and the middle shaft is right where the sunlight starts. My bad.






[This message has been edited by 1208hawktree (edited 8/18/2014 11:16p).]

That was my reaction when I saw how big the damned pictures were...

Anser on the market.

Looks like the SLDR won.

Neither (or both) won, really, just decided to keep the more recent club. Both have their positives, but I've come to the conclusion that I don't play enough to say one performs better than the other because I don't play but once every month or two. The Anser is still the "hottest" feeling driver I've ever hit, and this shaft is a perfect fit for the head. On solid hits, it's every bit as long as the SLDR. Not being a salesman, I'm actually OK with keeping it if nobody wants it.

[This message has been edited by 1208hawktree (edited 8/17/2014 9:31p).]

The 56 looked so bad I figured I'd help the cause a little and clean it up some with steel wool. Here you go.




[This message has been edited by 1208hawktree (edited 8/17/2014 10:37p).]

jj, is a "killed" edge similar to the 54* CG10 that you grinded down to a 6* bounce and back weighted?

If so, may be interested in that 60* wedge.

Damn, I wish I could have it all!!

Will those shafts work for a TM r1 driver?

quote:

---

jj, is a "killed" edge similar to the 54* CG10 that you grinded down to a 6* bounce and back weighted?

If so, may be interested in that 60* wedge.

---

A killed leading edge is essentially blunted to reduce digging. It also is good for people with steep swings (me) and/or soft conditions. The combo of low bounce and blunt leading edge makes it really versatile. I also removed some from the heel. You can almost lay this wedge flat on the ground.



[This message has been edited by 1208hawktree (edited 8/18/2014 11:34a).]

quote:

---

Will those shafts work for a TM r1 driver?

---

I assume you mean the ones with the TM adapters? The project x will fit, but it's likely too short for a driver (would only play about 42.5-43 inches long). The Axivcore's adapter is a hybrid tip, so no, it won't work for a driver. The Kyoshi in the Anser is driver length obviously, but currently has a PING tip on it. I could possibly be persuaded to remove that...

I'll take the Vokeys.

[This message has been edited by Zip04 (edited 8/19/2014 3:40p).]

Driver head sold. Shaft still available.

I'll email you my paypal info. Thanks.

Sent payment.

Vokeys sold and new pics of Oban added after Ping adapter removed.

[This message has been edited by 1208hawktree (edited 8/19/2014 1:41a).]

I'm open to realistic offers on the remaining items.

Price drops

Received the clubs. Thank you!

Hit em well.

[This message has been edited by 1208hawktree (edited 8/25/2014 11:22p).]

Price drops again....

Bump. Open to realistic offers.