Need about an acre or so surveyed in the CS area. Anyone have a good rec on who they have used?
Outlaw0206 said:
Thanks guys, was able to make contact with Adam
SARATOGA said:
ATM DOES QUALITY WORK.
Kerr, Garrett, Williams - ALL NO.
Make sure that your surveyor personally goes to each corner point and verifies with a clean line of sight to the last corner/point/callout.
I've had surveyors just say "yep same as the last one" without marking all corners, or verifying with sightlines from corner to corner.
Don't give me this "1300 feet N.E. AT 42 degrees" business. Establish the line and mark it as such.
"There is too much brush"
"It is too wet"
Do your job ! Get chopping or get some waders.
/EndRant
Slawster said:
I've been doing construction only surveying for 20 years. I trust Brad Kerrs corners over the rest.
Also it is completely acceptable to not chop line all the way down the property line. Nobody uses the old equipment anymore. You are basically asking them to triple the amount of time spent doing the survey. Which will reflect in the price.
RAMunger83 said:
Outlaw - please contact me if you still need some help. I know 'em all and I'm not going to spout off here publically.
Zaiquiri said:
Kling always had the tightest rods when I was surveying (for a different company). If I was back in the area and needed a survey, I'd call him or the company he is with now.
ATM, Carlomagno, and Mayo all seemed ok.
Garret was a joke. Kerr recently had a field crew turnover. No idea how their work is now.